ARP SERIES
two motors is desirable. The selector switch allows selection
of alternation or for continuous operation of either load. LED’s
indicate the status of the output relay. This versatile series may
be front panel mounted (BZ1 accessory required) or 35 mm DIN
rail mounted with an accessory socket.
Operation
Alternating: When the rotary switch is in the “alternate”
position, alternating operation of Load A and Load B occurs upon
the opening of the control switch S1. To terminate alternating
operation and cause only the selected load to operate, rotate
the switch to position “A” to lock Load A or position “B” to lock
Load B. The LEDs indicate the status of the internal relay and
which load is selected to operate.
Note: Input voltage must be applied at all times for proper
alternation. The use of a solid-state control switch for S1 may
not initiate alternation correctly. S1 voltage must be from
the same supply as the unit’s input voltage (see connection
diagrams). Loss of input voltage resets the unit; Load A
becomes the lead load for the next operation.
Duplexing (Cross Wired): Duplexing models operate the same
as alternating relays and when both the Control (S1) and Lag
Load (S2) Switches are closed, Load A and Load B energize
simultaneously.
The DPDT 8-pin, cross-wired option, allows extra system load
capacity through simultaneous operation of both motors when
needed. Relay contacts are not isolated.
|
ARP 、 C103PM 、 PSC8 、 PSC11 、 NDS-11 、 NDS-8 、 BZ1 、 AR120A-3095 、 ARP23S 、 ARP41 、 ARP41S 、 ARP42S 、 ARP43 、 ARP43S 、 ARP61S 、 ARP62S 、 ARP63S |
|
|
DIN Rail 、 Hold-down Clips 、 11-pin Socket 、 Octal 8-pin Socket 、 Front Panel Mount Kit 、 Protection Relays 、 Alternating Relays |
|
|
|
|
|
Datasheet |
|
|
CE 、 CSA 、 UR |
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2016/11/23 |
|
|
Rev: 1-A-062116 |
|
|
|
|
|
584 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
