ZL30142 SyncE SONET/SDH G.8262/Stratum 3 System Synchronizer Short Form Data Sheet

2022-10-19

●Features
■Supports the requirements of ITU-T G.8262 for synchronous Ethernet Equipment slave Clocks (EEC option 1 and 2)
■Supports the requirements of Telcordia GR-1244 Stratum 3 and GR-253, ITU-T G.812, G.813
■Supports ITU-T G.823, G.824 and G.8261 for 2048 kbit/s and 1544 kbit/s interfaces
■Meets the SONET/SDH jitter generation requirements up to OC-48/STM-16
■Synchronizes to telecom reference clocks (2 kHz, N*8 kHz up to 77.76 MHz, 155.52 MHz) or to Ethernet reference clocks (25 MHz, 50 MHz, 62.5 MHz, 125 MHz)
■Generates standard SONET/SDH clock rates (e.g., 19.44 MHz, 38.88 MHz, 77.76 MHz, 155.52 MHz, 622.08 MHz) or Ethernet clock rates (e.g., 25 MHz, 50 MHz, 125 MHz, 156.25 MHz, 312.5 MHz) for synchronizing Gigabit Ethernet PHYs
■Programmable output synthesizer generates telecom clock frequencies from any multiple of 8 kHz up to 100 MHz
■Generates several styles of telecom frame pulses with selectable pulse width, polarity and frequency
■Internal state machine automatically controls mode of operation (free-run, locked, holdover)
■Flexible input reference monitoring automatically disqualifies references based on frequency and phase irregularities
■Provides automatic reference switching and holdover during loss of reference input
■ Supports master/slave configuration and dynamic input to output delay compensation for AdvancedTCATM
■Configurable input to output delay and output to output phase alignment

MICROSEMI

ZL30142GGGZL30142ZL30142GGG2

More

Part#

System Synchronizer

More

System Timing Cards ]

More

Datasheet

More

More

Please see the document for details

More

More

64 Pin CABGA;64 Pin CABGA*

English Chinese Chinese and English Japanese

March 2013

775 KB

- The full preview is over. If you want to read the whole 4 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: