ANALOG DEVICES HDMI/DVI Buffer with Equalization AD8195
●The AD8195 is an HDMI/DVI buffer featuring equalized TMDS inputs and preemphasized TMDS outputs, ideal for systems with long cable runs. The AD8195 includes bidirectional buffering for the DDC bus and bidirectional buffering with integrated pull-up resistors for the CEC bus. The DDC and CEC buffers are powered independently of the TMDS buffers so that DDC/CEC functionality can be maintained when the system is powered off. The AD8195 meets all the requirements for sink tests as defined in Section 8 of the HDMI Compliance Test 1.3c.
The AD8195 is specified to operate over the −40°C to +85°C temperature range.
●FEATURES
■1 input, 1 output HDMI/DVI link
■Enables HDMI 1.3a-compliant front panel input
▲4 TMDS channels per link
◆Supports 250 Mbps to 2.25 Gbps data rates
◆Supports 25 MHz to 225 MHz pixel clocks
◆Equalized inputs for operation with long HDMI cables(20 m at 2.25 Gbps)
◆Preemphasized outputs
◆Fully buffered unidirectional inputs/outputs
◆50 Ω on-chip terminations
◆Low added jitter
◆Transmitter disable feature
◆Reduces power dissipation
◆Disables input termination
▲3 auxiliary buffered channels per link
◆Bidirectional buffered DDC lines (SDA and SCL)
◆Bidirectional buffered CEC line with integrated pull-up resistors (27 kΩ)
◆Independently powered from 5 V of HDMI input connector
◆Logic level translation (3.3 V, 5 V)
◆Input/output capacitance isolation
■Standards compatible: HDMI, DVI, HDCP, DDC, CEC
■40-lead LFCSP_VQ package (6 mm × 6 mm)
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LFCSP_VQ |
|
English Chinese Chinese and English Japanese |
|
02/23/2017 |
|
Rev.B |
|
D07049-0-8/12(B) |
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
- EPC GaN FETs Deliver Benchmark Power Density and Efficiency for DC/DC Conversion
- Keysight Technologies and Analog Devices Demonstrate Latest O-RAN Technology at Mobile World Congress 2022
- Keysight Signs Memorandum of Understanding with Analog Devices to Advance 6G Technology Design and Development
- SMART Modular Announces the SMART Kestral PCIe Optane Memory Add-in-Card to Enable Memory Expansion and Acceleration
- Bluetooth® 5.3 – What‘s New for IoT Device Makers and Application Developers?
- Should DC-DC Or LDO Be Used?
- GaN Transistor for Several Power Applications
- Cmsemicon, Representing the New Power of China, Won the Domestic Power Device Industry Excellence Award
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.