Model 2165 LoPro™ Turntable 1.2-Meter User Manual

PublishTime：2024-12-12

●The ETS-Lindgren Model 2165 LoPro™ Turntable is an electric-powered, variable-speed turntable platform system designed for use with the EMCenter™ Modular RF Platform (or next generation ETS-Lindgren controller, if applicable) for EMI compliance testing. The Model 2165 is a low-profile design constructed of PVC plate with a textured ABS top and other non-metallic components. The 1.2-meter diameter turntable is an easily assembled system that can be disassembled for service or to be moved. The mechanical assembly, motor drive unit, and shaft kit (optional) comprise the three basic subassemblies of the turntable.
●The mechanical assembly is shipped assembled with the top, base, gearbox, support bearings, and drive belt. The bearings on which the turntable rotates are integral to the top and bottom of the table. Three independent bearing races provide support for the inner and outer portions of the turntable top. These bearings are of a completely non-metallic construction. There are four keepers located on the outside of the turntable top that prohibit the bearings from shifting out of position during shipment. When the table is in place and ready to begin testing, the keepers should be removed.
●The motor drive, encoder, and limit switch assemblies are located in a shielded enclosure with state-of-the-art I/O provided by a fiber optic interface. The motor drive is coupled to the drive shaft with a flexible hose coupling. The other end of the shaft connects to the turntable gearbox with a keyed coupling that clamps between the two shafts. The shaft assembly transmits torque from the motor drive to the gearbox at the table. The drive belt runs around the underside of the turntable at its perimeter, and is driven by a pulley in the gearbox.
●Turntable rotation is limited by the soft, or electrical, limits that are set on the front panel of the controller.
●There is a 1 cm (0.40 in) vertical x 2.54 cm (1.0 in) horizontal slot on the bottom side of the turntable base that can be used to run 3/8-in maximum diameter cable from the side and up through the center opening of the turntable.

Brand of Product：	ETS-Lindgren
Part#：	Model 2165 、 2165 More Part#
Product Category：	Turntable 1.2-Meter 、 electric-powered, variable-speed turntable platform system More
Application：	[ EMI compliance testing ] More
Data Type：	User's Guide More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	December, 2021
Version Number：	Revision E
Data Encoding：
Data Size：	2.1 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 35 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits