RF125-TX RF125-TX2 RF125-RA RF125-RX Product Specification
■The RF125-TX module, combined with our RF125-RX module, 125K wireless air wake-up and data transmission, can be applied to PKE keyless access control, campus access control, etc. For RF125-TX, the transmitter ID, transmission data content, and transmission time interval can be set through the serial port.
■RF125-RX, the receiver has low power consumption and wireless wake-up, can wake itself up in the air and wake up the connected device at the same time, the receiver serial port outputs the received wireless data. It can work in pairing mode or broadcast mode. The communication distance is 5-8 meters, far exceeding the same type of products.
■RF125-RA is a full-featured wireless wake-up module that integrates RF125-RX, 125KHz antenna, pairing button, and coin cell for battery. Just insert the battery and start to use.
●Features
■Transmitter RF125-TX wide voltage input: 6-30V
■Transmitter RF125-TX2 voltage input: 9-12V
■Transmitter operating temperature range: -40~85℃
■The transmitter can send default data or customize data content
■Transmitter ID can be modified
■The transmission time interval can be modified
■Transmitter built-in overvoltage protection
■Transmitter built-in overcurrent protection
■Transmitter built-in reverse connection protection
■Receiver wakes up connected device
■The receiver supports pairing mode and broadcast mode
■Receiver ultra-low power consumption
■Small receiver size
■Long communication distance (far beyond products of the same type)
■High receiving performance
■Receiver working voltage: 2.5~3.6V
■Receiver operating temperature range: -40~85℃
■Receiver carrier frequency range: 15-150KHz
■Low-power three-channel low-power ASK receiver
■Receive and wake up sensitivity: 80uVRMS
■The lowest power consumption in the listening state of the receiver in low power consumption mode: <9uA
■Receiver 1/2/3 channel independent operation
■Programmable sensitivity adjustment range
■False trigger counter
■Support RTC wake-up timing
■The receiver supports three wake-up modes:frequency detection/pattern recognition/location recognition
■32-bit programmable Manchester wake-up mode
|
[ Campus access card ][ Industrial data collection ][ BRT platform gate system ][ PKE keyless access control ][ battery ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021-1 |
|
|
Rev 1.1 |
|
|
|
|
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
- What Features Should a Portable Walkie-Talkie Module Have? Take G-NiceRF SA828 for An Example
- The Gas Meter Reading Application of RF Module RF4463Pro from G-NiceRF Saves Much Person Resource
- Advantages of G-NiceRF ASK Transmitter STX883Pro and ASK Receiver SRX883Pro in the Market
- G-NiceRF BLE5201 Module Communication Distance Testing Reaches 150m
- G-NiceRF LoRa Backscatter Device LoRa1276-C1 Provides Long-Range Communication with Low-Power
- G-NiceRF‘s FCC Certified Products for Wireless Transceiver Module: LoRa1276-915, RF2401PRO, RF2401F20, RF4463PRO
- G-NiceRF SA316 Series Audio Transmission Module - Upgraded Transmission Distance with Uncompromised Sound Quality
- G-NiceRF’s New LoRa Spread Spectrum Modulation SOC Wireless Module LoRa-STM32WLE5 with Built-in ARM and Industrial Grade Crystal Oscillator
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
