ZRF8366 Data Sheet 17~21.5GHz 16 Channel K Band Dual-Beam RX Beamformer
●The ZRF8366 is a dual-beam receive active beamforming RFIC designed for application in K-Band planar phased array antennas. The IC has eight RF input ports, two RF output ports, and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the device can be driven by eight single-polarized elements, or four dual-polarized antenna elements. The device integrated an 8-bit ADC for sampling the output of the temperature sensor. The chip features ESD protection on all pins.
●Control of all the on-chip registers is through a simple 4-wire serial port interface (SPI). In addition, three address pins allow SPI control of up to 8 devices on the same serial lines.
16 Channel K Band Dual-Beam RX Beamformer 、 dual-beam receive active beamforming RFIC |
|
[ Satellite communication ][ array antenna ][ ground terminal ][ communication equipment ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
20231204 |
|
Rev.1.0 |
|
|
|
828 KB |
- +1 Like
- Add to Favorites
Recommend
- 17~21.5GHz 16 Channel Dual-Beam RX Beamformer ZRF8366 Designed for Application in K-Band Planar Phased Array Antennas
- 27.5~31GHz 8 Channel Ka Band Tx Beamformer ZRF8165 that Each Channel Has 6-bit of Digital Shift Phase and Gain Control
- Silicone Foam is Suitable for the Areas such as Electrical appliances, Various pipelines, and New Energy Vehicles
- ONPOW Developed Plastic Push Button Switch such as ONPOW26 Series Meets the Needs of Industrial Equipment
- China XXYY Series DC-DC Converters Manufacture for A Wide Range of Applications Such as Telecommunications,Medical Equipment
- Adhesive Expert Jowat Facilitates Kitchen Manufacturer Nolte Küchen‘s Successful Product Changeover to Jowat Adhesive Alternatives
- Why DM Series DC DC Power Supply Has Gained Such Popularity in the Market
- Bi-direction ESD Protection Diode ESDBVD5V0C2 for Applications such as HDMI, Display Port TM, and MDDI Interfaces
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.