ZRF8366 17~21.5GHz 16 Channel K Band Dual-Beam RX Beamformer Data Sheet

2023-12-22
●Product description
■The ZRF8366 is a dual-beam receive active beamforming RFIC designed for application in K-Band planar phased array antennas. The IC has eight RF input ports, two RF output ports, and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the device can be driven by eight single-polarized elements, or four dual-polarized antenna elements. The device integrated an 8-bit ADC for sampling the output of the temperature sensor. The chip features ESD protection on all pins.
■Control of all the on-chip registers is through a simple 4-wire serial port interface (SPI). In addition, three address pins allow SPI control of up to 8 devices on the same serial lines.
●Features
■Frequency range: 17 to 21.5 GHz
■Noise figure: 3.1 dB
■360° phase adjustment range
▲Step size: 5.625°
■Signal gain (@19GHz): 9.9 dB
■Channel to channel isolation: TBD dB
■Input P1dB: -39 dBm
■Gain adjustment range: 31.5 dB,
▲Step size: 0.5 dB
■Operating power supply:
▲VDD1P2: +1.2V
▲VDD3P3: +3.3V
▲Internal LDO: +2.5V
■Operating temperature: -40°C to + 85°C
■Integrated temperature sensor
■Package size:4.4mm×7.3mm×0.65mm
■4-wire SPI interface

ZIRO

ZRF8366

More

Part#

16 Channel K Band Dual-Beam RX Beamformerdual-beam receive active beamforming RFICIC

More

Satellite communication ]array antenna ]ground terminal ]communication equipment ]K-Band planar phased array antennas ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

20230720

Rev.0.4

827 KB

- The full preview is over,the data is 1 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: