ZRF8365 8 Channel K Band RX Beamformer,17~21.5GHz Data Sheet

2023-12-22
●Product description
■The ZRF8365 is eight channel receive active beamforming RFIC designed for application in K band planar phased array antennas, each channel has 6-bit of digital shift phase and gain control. The device has 25dB of electronic gain and -40dBm IP1dB. The device integrated an 8-bit ADC for sampling the output of the temperature sensor. The chip features ESD protection on all pins.
■Control of all the on-chip registers is through a simple 4-wire serial port interface (SPI). In addition, three address pins allow SPI control of up to 8 devices on the same serial lines.
●Features
■Frequency range:17 to 21.5 GHz
■Noise figure: 2.8 dB
■360° phase adjustment range
▲Step size: 5.625°
■Signal gain (@19GHz) :16.5 dB
■Channel to Channel isolation: TBD dB
■Input P1dB: -40 dBm
■Gain adjustment range: 31.5 dB
▲Step size: 0.5 dB
■Operating power supply:
▲VDD1P2: +1.2V
▲VDD3P3: +3.3V
▲Internal LDO: +2.5V
■Operating temperature: -40°C to + 85°C
■Integrated temperature sensor
■Package size: 4.4mm×4.4mm×0.65mm
■4-wire SPI interface

ZIRO

ZRF8365

More

Part#

8 Channel K Band RX Beamformereight channel receive active beamforming RFIC

More

Satellite communication ]array antenna ]ground terminal ]communication equipment ]K band planar phased array antennas ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

20230720

Rev.0.4

815 KB

- The full preview is over,the data is 1 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: