P2H-FX HIGH PERFORMANCE SERVO PRESSES 1,000-1,600 kN 100 - 160 Metric Tons Capacity
■Designed for applications requiring multiple slide motion profiles, the Minster P2H-FX combines the characteristics of a traditional mechanically driven press with those of a servo drive.
■Low Inertia Drive engineered to enable higher acceleration and deceleration rates, Nidec Minster’s low inertia drive creates a faster response through each press stroke. Lower torque requirements also result in higher efficiency forming.
▲Higher Productivity
◆Faster response results in significantly higher production rates while running complex profiles including pendulum,rapid restrike and multi-point.
▲ Reduced Stopping Angle
◆Increased variability; operational capability to run longer feed lengths/angles at higher production rates.
▲ Higher Efficiency
◆Comparable speed profiles operated with lower inertia systems significantly reduce power requirements.
■Nidec Minster’s leading servo technology consistently provides more usable power than comparable air cooled motors, in addition to maintaining thermal stability and cooler operating temperature. These combined features lead to a longer component life and an overall cleaner operating environment.
■Robust Design - Nidec Minster presses are built to withstand increased forces of the new high tensile materials and stand the test of time. Our design configurations are:
▲ Built from forged high-strength alloy steel drive train components.
▲ Rated to full press tonnage and 50% reverse load rating.
▲ Cast iron frame.
▲ Full film lubrication bearings (main & connection)
■Precision Built - With extremely tight tolerances in the crown bearings, hydrostatic pistons and hydraulic slide lock-up, Minster presses will be built with the highest precision to your exact needs. Our low inertia shaft design creates:
▲ Superior dynamic parallelism and bottom-dead- center accuracy.
▲ Minimized backlash for consistent accuracy in pendulum mode.
|
P2H-FX 、 P2H-FX-100 、 P2H-FX-160 、 P2H-FX-100-48 、 P2H-FX-100-63 、 P2H-FX-160-75 |
|
|
|
|
|
Technical Documentation |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2022/11/4 |
|
|
|
|
|
|
|
|
2.3 MB |
- +1 Like
- Add to Favorites
Recommend
- Nidec Develops AC Servo Motor Equipped with Zignear® , the Location Detection Technology that Accommodates 17-bit Resolution, for the Industrial Robot Market
- Nidec Launches a Lineup of VR Series Servo Motor Reducers for Food Machinery, Achieving a Torque of up to 80% of Standard Models
- Nidec Launches New Models of FLEXWAVE Precision Control Reducers，Facilitating Servo Motor Installation
- Nidec Receives 2021 Bosch Global Supplier Award from Bosch Group
- Nidec Receives “Clarivate Top 100 Global Innovator 2024” Award
- Nidec Provides Combined Units to Enhance Functionality and Develop a New Market for Logistics Solutions
- Nidec Develops TapSense, the World’s Thinnest 1.4mm-thick Linear Resonant Actuator
- How Is the Servo Controlled Through PWM?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
