LPA2010S 3W Filter-free Mono Class-D Audio Power Amplifier
■The LPA2010S is a 3-W high efficiency filter-free mono class-D audio power amplifier (class-D amp) that requires only few external components. Its low THD+N feature offers high-quality sound reproduction. The new filterless architecture allows the device to drive speakers directly instead of using low-pass output filters thus saving PCB area and system cost.
■The LPA2010S contains circuitry to prevent “pop and click” noise that would occur during turn-on and turn-off transitions. For maximum flexibility, the LPA2010S provides an externally controlled gain (with resistors), as well as an externally controlled turn-on and turn-off times (with the bypass capacitor).
■The LPA2010S is capable of delivering 2.8W of continuous average power to a 4Ω load from a 5V power supply with less than 10% distortion (THD+N). The device utilizes a fully differential architecture, a full-bridged output, and a low-EMI modulation scheme.
■The LPA2010S is designed specifically to provide high quality output audio power with a minimal number of external components. The LPA2010S does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited where minimal board or solution size is a primary requirement. It features a low-power shutdown mode, which is achieved by driving the SD pin with logic low. Additionally, the LPA2010S features output short-circuit protection and internal thermal-overload protection.
■The LPA2010S is available in a MSOP8&DFN-8 package.
●Features
■2.5-5.5V Operation Voltage
■4.5mA Quiescent Current
■<1μA Shutdown Current
■Maximum Battery Life and Minimum Heat: up to 87% efficiency at 1.7W
■500kHz fixed frequency switching
■Optimized PWM Output Stage Eliminates LC Output Filter
■Low EMI
■Output Power (PO) at 10% THD+N: VDD=5V, 4Ω load, 2.8W
■Output Power (PO) at 1% THD+N: VDD=5V, 4Ω load, 2.3W
■External Gain Configuration Capability
■Short Circuit Protection
■RoHS Compliant and 100% Lead(Pb)-Free
■Package: MSOP8/DFN-8(2*2mm)
Filter-free Mono Class-D Audio Power Amplifier 、 high efficiency filter-free mono class-D audio power amplifier |
|
[ GPS Tracker ][ PSP ][ BT Speaker ][ Portable Electronic Devices ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
MSOP8;DFN-8 |
|
English Chinese Chinese and English Japanese |
|
Jul-2022 |
|
Rev:0.2 |
|
|
|
1.4 MB |
- +1 Like
- Add to Favorites
Recommend
- 2.7A Synchronous Boost DC-DC Convertor Features Up to 95% Efficiency
- Constant-current/constant-voltage Linear Charger for Single Cell Lithiumion Batteries Suitable for Portable Applications
- 140mW Headphone Amplifier with Unity-gain Stable
- 1A Dual Channel Charge Pump Power Solution For TFT LCD Panel
- 5V, Differential Input, DirectDrive, 215mW Stereo Headphone Amplifiers with Shutdown
- Enhancement Power MOSFET Integrating Two P-channel Enhancement Mosfet Transistor
- Renesas Provides a Solution for 3kw Off-board Ev Chargers Which Integrates the EV Charging Solution
- ROHM’s New Energy-Saving DC-DC Converter ICs Offered in the TSOT23 Package,Compact Size Reduces Component Area by 72%
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.