LP4080H Ultra-high Efficiency Linear Charger for TWS Earphones
■The LP4080H is an ultra-low power linear charger targeting at TWS earphone applications. It contains a linear charger to charge the Li-ion battery in the earphone with a CHGb charging status indication and an ENb input to disable the charger when needed. The constant charge current (CC) of the charger is programmable via the ISET pin by an external resistor. The charger has an ideal-diode mode for high efficiency and low heat operation. Two logic signals are offered to work with the Bluetooth SoC. The RESET outputs a reset signal to the SoC every time the earphone is placed into the charging case. The PWRON outputs a pulse signal to turn on the earphone SoC every time the earphone leaves the charging case. The GPO pin is a multifunctional output pin for system design. All these signals can also be controlled via a one-wire communication.
■The whole system is in a small 8-pin 2x2 DFN package.
●Features
■Input over-voltage protected up to 8-V
■0.6-μA standby current from the battery
■Programmable charge current up to 300mA
■Ideal diode mode for high efficiency and low heat
■7.5-mA fixed trickle charge
■9-mA fixed termination current
■Programmable 4.0-V/4.2-V/4.35-V/4.4-V constant voltage options
■Automatic battery recharge control
■CHGb output for charging status indication
■ENb control to disable the charger
■RESET signal to prevent the bluetooth system on chip(SoC) firmware failure
■PWRON signal to automatically power on the earphone SoC once leaving the charging case
■Private one-wire bus to send instructions from the charging case to the linear charger for control
■Programmable general purpose output signal
■I2C interface with interrupt indication
■4-uA ultra-low quiescent current
■2mm X 2mm DFN-8 package
■RoHS Compliant and 100% Lead (Pb) free
|
Ultra-high Efficiency Linear Charger 、 ultra-low power linear charger |
|
|
[ TWS earphones ][ Wireless microphone ][ Smart Glasses ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
DFN;QFN;DFN-8 |
|
|
English Chinese Chinese and English Japanese |
|
|
10/5/2022 |
|
|
Rev: 1p1 |
|
|
|
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- 2.7A Synchronous Boost DC-DC Convertor Features Up to 95% Efficiency
- Constant-current/constant-voltage Linear Charger for Single Cell Lithiumion Batteries Suitable for Portable Applications
- 140mW Headphone Amplifier with Unity-gain Stable
- 1A Dual Channel Charge Pump Power Solution For TFT LCD Panel
- 5V, Differential Input, DirectDrive, 215mW Stereo Headphone Amplifiers with Shutdown
- Enhancement Power MOSFET Integrating Two P-channel Enhancement Mosfet Transistor
- 需要充电吗？具有开尔文源引脚的SiC MOSFET DIF120SIC053-AQ加速电动汽车充电过程
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
