TECHNICAL DATA SHEET – DENSIT® WEARFLEX 500 CHEMICALLY BONDED QUARTZ-CERAMIC
■Densit® WearFlex 500 wear resistant linings provide excellent protection against moderate wear at temperatures up to 400°C (750°F).
●SPECIFICATION
■Install mesh
■Mix one bag Densit® WearFlex 500 Binder and one bag Densit® Wear 500 Sand for 1 minute
■Add water and mix for 8 minutes
■Trowel mix onto mesh
■Apply Densit® Curing Compound
●For more details refer to the “Densit® WearFlex Manual” Densit® WearFlex 500 is a trowellable two-component dry mortar.
●The bags must be stored on a dry stock to maintain the good properties of the compound. The guaranteed shelf life is 14 months from production date. A paddle mixer must be used for mixing the compound. A significant change in consistency of the material (from dry to plastic) must be observed within 3 minutes from addition of water. Avoid Densit® compound to make contact with aluminium or galvanised steel. Densit® WearFlex 500 should be installed on a standard expanded metal mesh welded on the steel casing.
CHEMICALLY BONDED QUARTZ-CERAMIC 、 trowellable two-component dry mortar |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
04/2021 |
|
v2 |
|
|
|
253 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.