TECHNICAL DATA SHEET – DENSIT® WEARSPRAY 500 CHEMICALLY BONDED QUARTZ-CERAMIC
■Densit® WearSpray 500 wear resistant linings provide excellent protection against moderate wear at temperatures up to 400°C (750°F).
●SPECIFICATION
■Install mesh
■Mix one bag Densit® WearSpray 500 Binder and one bag Ducorit® Spraying Sand 1000 with fibres for 1 minute
■Add water and mix for 5-10 minutes
■Convey material through recommended pump
■Spray mixed material onto mesh
■Smooth the surface if required
■Apply Densit® Curing Compound
■For more details refer to the “Densit® WearSpray Video”
●Densit® WearSpray 500 is a sprayable two-component dry mortar.
●The bags must be stored on a dry stock to maintain the good properties of the compound. The guaranteed shelf life is 14 months from production date. A paddle mixer must be used for mixing the compound. A significant change in consistency of the material (from dry to plastic) must be observed within 3 minutes from addition of water. Avoid Densit® compound to make contact with aluminium or galvanised steel. Densit® WearSpray 500 should be installed on a standard stretch metal mesh welded on the steel casing and can even be installed “over head“.
|
CHEMICALLY BONDED QUARTZ-CERAMIC 、 sprayable two-component dry mortar |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
04/2021 |
|
|
v2 |
|
|
|
|
|
229 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
