TECHNICAL DATA SHEET – DENSIT® WEARFLEX 1000 CHEMICALLY BONDED BAUXITE-CERAMIC
■Densit® WearFlex 1000 wear resistant linings provide excellent protection against high erosive wear at temperatures up to 400°C (750°F).
●SPECIFICATION
■Install mesh
■Mix dry compound for 1 minute
■Add water and mix for 8 minutes
■Trowel mix onto mesh
■Apply Densit® Curing Compound
●For more details refer to the “Densit® WearFlex Manual” Densit® WearFlex 1000 is a trowellable one-component ready-mix delivered in 25 kg bags.
●The bags must be stored on a dry stock to maintain the good properties of the compound. The guaranteed shelf life is 14 months from production date A paddle mixer must be used for mixing the compound. A significant change in consistency of the material (from dry to plastic) must be observed within 3 minutes from addition of water. Avoid Densit® compound to make contact with aluminium or galvanised steel. Densit® WearFlex 1000 should be installed on a standard expanded metal mesh welded on the steel casing.
CHEMICALLY BONDED BAUXITE-CERAMIC 、 trowellable one-component ready-mix |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
04/2021 |
|
v2 |
|
|
|
249 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.