ISG3201 100V Half-Bridge Solid-GaN Integrating Gate Driver
●The ISG3201 is a 100V Copak product in Innoscience’s SolidGaN family. It integrates two 100V enhancement mode GaN devices with a 100V half-bridge gate driver. ISG3201 employs bootstrap technique for high-side driver voltage and can operate up to 100V. The integrated driver eliminates the external clamping circuit. Besides, turn-on and turn-off resistors, bootstrap and VCC decoupling caps are all integrated which makes the external circuit super simple. Due to excellent internal layout, the associated gate loop and power loop parasitic is reduced significantly, with value much less than 1nH. As a result, ultra-low voltage spike on switch nodes can be achieved. Turn-on speed of the half-bridge GaN HEMTs can be adjusted by an optional resister. The optimized pin layout of ISG3201 optimizes the power flow and simplifies the PCB board layout. ISG3201 employs independent high-side and low-side PWM input, which are usually available from most of GaN controllers. The ISG3201 is available in a compact 5mmx6.5mmx1.12mm LGA package.
■Features:
●2x 100V, 3.2mohm Emode GaN HEMT with Half Bridge Driver
●60A continuous current capability
●Zero reverse recovery charge
●Ultra-low on resistance
●Minimum external components. (Driving resistor, bootstrap and Vcc capacitors integrated)
●Reduced Gate Loop Inductance.
●Reduced Power Loop Inductance.
●Easy for power stage layout.
●Independent High-Side and Low-Side TTL Logic Inputs
●High-side floating bias voltage rail operates up to 100 VDC
●Fast Propagation Times (17ns Typical)
●5mmx6.5mmx1.12mm LGA Package
[ high-frequency Buck converter ][ half bridge converters ][ full bridge converters ][ Class D audio amplifier ][ LLC converter ][ power modules ][ AI ][ Server ][ Telecom ][ Super Computer ][ Motor Drive ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LGA |
|
English Chinese Chinese and English Japanese |
|
2023/06/28 |
|
Rev. 1.0 |
|
|
|
3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.