SP720 Series 3pF 4kV Diode Array
■ The SP720 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP720 has 2 protection SCR/Diode device structures per input. A total of 14 available inputs can be used to protect up to 14 external signal or
bus lines. Over-voltage protection is from the IN (pins 1-7 and 9-15) to V+ or V-.
■The SCR structures are designed for fast triggering at a threshold of one +V BE diode threshold above V+ (Pin 16) or a -V BE diode threshold below V- (Pin 8). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one V BE above V+. A similar clamp to V-is activated if a negative pulse, one V BE less than V-, is applied to an IN input. Standard ESD Human Body Model (HBM) Capability is:
●Features & Benefits
■ESD Interface Capability for HBM Standards
▲ MIL STD 3015.7 15kV
▲ IEC 61000-4-2, Direct Discharge,
▲ Single Input 4kV (Level 2)
▲ Two Inputs in Parallel 8kV (Level 4)
▲ IEC 61000-4-2, Air Discharge 15kV (Level 4)
■ High Peak Current Capability
▲ IEC 61000-4-5 (8/20μs) ±3A
▲ Single Pulse, 100μs Pulse Width ±2A
▲ Single Pulse, 4μs Pulse Width ±5A
■ Designed to Provide Over-Voltage Protection
▲ Single-Ended Voltage Range to +30V
▲ Differential Voltage Range to ±15V
■ Fast Switching 2ns Risetime
■ Low Input Leakages 1nA at 25º (Typ)
■ Low Input Capacitance 3pF (Typ)
■ An Array of 14 SCR/Diode Pairs
■ Operating Temperature Range -40ºC to 105ºC
SP720 Series 、 SP720 、 SP720APP 、 SP720ABG 、 SP720ABTG 、 SP720**** 、 SP720AP 、 SP720AG |
|
[ Microprocessor ][ Logic Input Protection ][ Data Bus Protection ][ Analog Device Input Protection ][ Voltage Clamp ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
PDIP;SOIC |
|
English Chinese Chinese and English Japanese |
|
08/10/23 |
|
|
|
|
|
635 KB |
- +1 Like
- Add to Favorites
Recommend
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- New Littelfuse 400PV Photovoltaic Fuses Provide Rugged Circuit Protection for Next-Gen Integrated Solar Shingles
- Littelfuse EV1K Series Fuse First to Provide 1000Vdc Automotive Grade Protection for Next-Gen Passenger Cars and Commercial EVs
- Littelfuse Launches 1500 Volt Solar String Fuse and Holder Rated 35 to 60 Amperage
- Littelfuse New High-Voltage Cartridge Fuses 828 Series, AEC-200 Compliant with a 1,000 Vdc Interrupting Rating
- Littelfuse Completes Acquisition of C&K Switches
- Littelfuse expands its fuse manufacturing operation in China, Cuting Customer Order Fulfillment Lead Time by Half
- Littelfuse Expands PolySwitch® Low Rho SMD Series Adding 23 New Ratings to The Existing Product Portfolio
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.