IAM-20680HP High Performance Automotive 6-Axis MotionTracking Device
■The IAM-20680HP is a 6-axis MotionTracking device for Automotive not-safety applications that combines a 3- axis gyroscope and a 3-axis accelerometer in a small 3x3x0.75mm (16-pin LGA) package. It also features a 4096-byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. IAM-20680HP, with its 6-axis integration, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance.
■The gyroscope has a programmable full-scale range of ±250 dps, ±500 dps, ±1000 dps and ±2000 dps. The accelerometer has a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g. Factory- calibrated initial sensitivity of both sensors reduces production-line calibration requirements.
■Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features I²C and SPI serial interfaces, a VDD operating range of 1.71V to 3.6V, and a separate digital IO supply, VDDIO from 1.71V to 3.6V.
●FEATURES
■Digital-output X-, Y-, and Z-axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of ±250dps, ±500dps, ±1000dps, ±2000dps and integrated 16-bit ADCs.
■Digital-output X-, Y-, and Z-axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g, ±16g and integrated 16-bit ADCs
■User-programmable digital filters for gyroscope, accelerometer, and temperature sensor
■Embedded Self-test
■Wake-on-motion interrupt for low power operation of applications processor
■Reliability testing performed according to AEC–Q100: PPAP and qualification data available upon request
■Final test at -40°C, 25°C, and 105°C
■Burn-in in production
|
6-axis MotionTracking device 、 High Performance Automotive 6-Axis MotionTracking Device |
|
|
[ Automotive ][ Automotive not-safety applications ][ Automotive applications ][ Navigation Systems ][ Dead Reckoning ][ Lift Gate Motion Detection ][ Vehicle to Vehicle ][ Infrastructure ][ 360º View Camera Stabilization ][ Car Alarm ][ Telematics ][ Insurance Vehicle Tracking ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
LGA |
|
|
English Chinese Chinese and English Japanese |
|
|
09/17/20 |
|
|
Revision: 1.1 |
|
|
PB-000069 |
|
|
248 KB |
- +1 Like
- Add to Favorites
Recommend
- TDK Announces Worldwide Availability of High Performance Imu Platform to Enhance Automotive Application Accuracy
- TDK Sensor Fusions Support the Realization of Automated Driving Beyond Level 2
- TDK New 3-Axis Accelerometer IAM-20381HT, Finalizing Transition of SmartAutomotive™ Non-Safety Product Family to 105℃
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- InvenSense® Provides High-Accuracy Turn-By-Turn Navigation User Experience To HiSilicon Mobile Platforms and Huawei Smartphones
- TDK’s New SmartMotion® Platform Accelerates Development of IOT Solutions Based on Invensense Motion Sensors
- InvenSense® Announces UltraPrint™ Mass-Manufacturable Ultrasound Fingerprint Touch Sensor Solution
- InvenSense® Ushers in the Era of Sensor System-On-Chip With the World’s First Integrated Motion Sensor and Multi-Core Processing
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
