IAM-20380HT High Performance Automotive Grade2 3-axis Gyroscope
■The IAM-20380HT is a grade2 3-axis gyroscope MotionTracking device for Automotive non-safety applications in a thin 3x3x0.75mm³ (16-pin LGA) package. It also features a 4096-byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. IAM-20380HT, with its 3-axis integration, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance.
■The gyroscope has a programmable full-scale range of ±250 dps, ±500 dps, ±1000 dps and ±2000 dps. Factory-calibrated initial sensitivity of both sensors reduces production-line calibration requirements.
■Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and two programmable interrupts. The device features I²C and SPI serial interfaces, a VDD operating range of 1.71V to 3.6V, and a separate digital IO supply, VDDIO from 1.71V to 3.6V.
●FEATURES
■Digital-output X-, Y-, and Z-axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of ±250dps, ±500dps, ±1000dps, and ±2000dps, integrated 16-bit ADCs.
■User-programmable digital filters for gyroscope and temperature sensor
■Embedded Self-test
■Two interrupt lines
■Reliability testing performed according to AEC–Q100: PPAP and qualification report available upon request
■Final test at -40°C, 25°C, and +105°C
|
High Performance Automotive Grade2 3-axis Gyroscope 、 grade2 3-axis gyroscope MotionTracking device |
|
|
[ Automotive applications ][ Dead Reckoning ][ Lift Gate Motion Detection ][ Vehicle to Vehicle ][ Infrastructure ][ Camera ][ Vision Systems ][ Head-up display ][ HUD ][ Car Alarm ][ Telematics ][ Insurance Vehicle Tracking ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
LGA |
|
|
English Chinese Chinese and English Japanese |
|
|
09/14/2022 |
|
|
Revision: 1.0 |
|
|
DS-000521 |
|
|
3.1 MB |
- +1 Like
- Add to Favorites
Recommend
- TDK Launched IAM-20380HT High Performance Grade 2 3-Axis Gyroscope for Automotive Non-safety Applications
- TDK Launches World’s First Monolithic Stand-alone Gyroscope for Non-safety Automotive Applications up to 105℃
- TDK New 3-Axis Accelerometer IAM-20381HT, Finalizing Transition of SmartAutomotive™ Non-Safety Product Family to 105℃
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- InvenSense® Provides High-Accuracy Turn-By-Turn Navigation User Experience To HiSilicon Mobile Platforms and Huawei Smartphones
- TDK’s New SmartMotion® Platform Accelerates Development of IOT Solutions Based on Invensense Motion Sensors
- InvenSense® Announces UltraPrint™ Mass-Manufacturable Ultrasound Fingerprint Touch Sensor Solution
- InvenSense® Ushers in the Era of Sensor System-On-Chip With the World’s First Integrated Motion Sensor and Multi-Core Processing
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
