RX23E-A Group Channel-to-channel isolated analog measurement system

2023-05-11
■Introduction
●This document describes a system which has 4 pieces of Renesas microcontroller RX23E-A measuring temperature or voltage synchronously with channel-to-channel isolation. RX23E-A in each unit samples output voltage of thermocouple/RTD or pin input voltage with built-in 24-bit Δ-ΣA/D converter (DSAD) in cycle of approximate 1 msec, performs filter processing, and converts to temperature or voltage.
●As an upper layer MCU, RX72M obtains temperature or voltage measured in each unit in cycles of 10 ms and transmits to PC via USB. As a result, 4-channel synchronous measurement can be realized within 1 ms.
●Communication between 4 pieces of RX23E-A and RX72M is performed by a single channel 3-wire serial communication, and individual communications with the specified unit address and the broadcast communication are performed. This can reduce isolators comparing to 4-wire SPI communication which uses chip select.

Renesas

RX23E-A GroupRX23E-ARX72MR5F523E6SDNFR5F572MNDDBD

More

Part#

microcontrollerMCU

More

Analog input module ]Temperature controller ]Recorder ]

More

Application note & Design Guide

More

More

Please see the document for details

More

More

HWQFN

English Chinese Chinese and English Japanese

July.16.21

Rev.1.10

R01AN5679EJ0110

6.2 MB

- The full preview is over. If you want to read the whole 76 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: