CMS80F261x Datasheet Enhanced Flash 8bit 1T 8051-Microcontroller
■CMS80F261x series is an 8051 core, a 1T instruction system compatible with MCS-51, and a general IO type 8-bit chip.
■The operating frequency can reach up to 48MHz. The MCU has the following characteristics:
▲With a maximum of 64KB program area, 256B RAM space, 4KB XRAM, 1KB Non-volatile data area.
▲ With four oscillation modes.
▲ It supports three working modes: normal, idle, and sleep, which can effectively reduce power consumption.
▲ Built-in low-voltage reset LVR, low-voltage monitoring LVD, watchdog overflow reset and other protection settings can effectively improve the reliability of system operation.
▲ With multiple interrupt sources such as external interrupts, timed interrupts and other peripheral interrupts, it can respond to external events in a timely manner and improve the utilization of the MCU.
▲ 10 timers, which can realize functions such as timing, counting, input capture, output comparison, timing wake-up, and baud rate generator.
▲ With hardware multiplication and division unit MDU, cyclic redundancy check unit CRC.
▲ Up to 8COM and 24SEG LED driver modules are supported.
▲ Up to 8COM and 32SEG LCD driver modules are supported.
▲ 6-channel 16-bit PWM, supports independent, complementary, and synchronous three-mode output, and has hardware brake function, dead zone control function, mask output and other functions.
▲ With high-precision 12-bit ADC and selectable internal reference voltage, up to 2 operational amplifiers, up to 2 comparators, and more abundant analog functions.
CMS80F261x 、 CMS80F2618 、 CMS80F2619 、 CMS80F261A 、 CMS80F261B 、 CMS80F261x series |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOP28;LQFP32;LQFP44;LQFP48 |
|
English Chinese Chinese and English Japanese |
|
Feb 2023 |
|
Rev. 1.06 |
|
|
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Cmsemicon Launches CMS8S589x of High-Capacity 8051 Series Microcontrollers with Arbitrary GPIO Mapping
- Cmsemicon‘s New BAT32A2 Series 32-bit MCU Complying with AEC-Q100 Standard Boosts Intelligent Automotive
- Cmsemicon Passes ISO 26262 Automotive Functional Safety ASIL D Process Certification
- Cmsemicon Awarded Excellent Supplier in the Ecological Chain by Xiaomi
- CMSemicon Once Again Wins the “Top 10 Main Control Chips for BLDC Motor Controller”
- IAR Systems Fully Support Cmsemicon‘s Automotive-grade BAT32A Series MCUs
- Cmsemicon Launches Automotive MCU BAT32A233, Further optimizing Analog Peripheral Resources
- CMSemicon Wins Double Awards in the IoT Star Awards 2021
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.