Brushless DC Motors: Electrical Connections
●Bodine 24 Volt motors and gearmotors have four 18 AWG wires and a five-conductor shielded cable for connection to a Bodine 24 Volt control. The three motor phase connections are made with .250” quick connect receptacles. The ground lead is terminated with a ring terminal and the 24 AWG commutation leads inside the 5-conductor shielded cable are terminated in a 6-pin in-line connector with 0.1” center distances.
●The harness is a nominal 24” long from the motor housing to the end of the connections.
▲Wiring Harness for 130 Volt Motors and Gearmotors
●Bodine 130 Volt motors and gearmotors have a single 14-pin plug & twist connector at the end of a nominal 12” long harness. This provides a quick and easy means of connecting the motor or gearmotor to a Bodine 115 VAC control. An interface cable is needed between the motor and the control. Model 3983 is a 6’ long cable that can be used to connect 130 Volt motors and gearmotors to Bodine control models3910, 3911, and 3921. Model 3982 is a 6’ long cable that can be used to connect 130 Volt motors and gearmotors to Bodine control model 3912. It can also be used as an extension cable for use with any of the above mentioned controls. Encased model 3912 includes a 6' cable.
|
MOLEX 08-50-0113 、 AMP 640902-1 、 AMP 640204-1 、 MOLEX 22-01-3067 、 AMP 66098-7 、 AMP 66102-7 、 AMP 206044-1 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2006/11/17 |
|
|
|
|
|
|
|
|
179 KB |
- +1 Like
- Add to Favorites
Recommend
- Citroën Ami : a 100% Electric Vehicle for New Mobility a 48V Electric Unit Which Allows the Electric Motor to Be Powered
- UNIMOTION Mini Electric Cylinder MCE and Mini Electric Slider MSCE
- ROHM‘s 4th Generation SiC MOSFETs to be Used in Hitachi Astemo‘s Inverters for Electric Vehicles, Contributing to Longer Cruising Range and Smaller Systems in Electric Vehicles
- What causes Li Ion of electric cars spontaneously combust?
- Application of Hottech NMOS Products in Electric Two-wheeled Vehicles
- Electric Vehicle Malfunctions Due to Lack of Fuses or Diodes
- Nidec’s In-wheel Motor is Adopted by China’s Largest Electric Two-wheel Vehicle Manufacturer for the First Time
- Developing Optimized Sensors with Software for Electric Vehicles
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
