SMARC sAT30 USER GUIDE
●The SMARC® (Ultra Low Power – Computer on Module) sAT30 is a versatile small form factor Computer-On-Module that requires low power and provides high performance at low cost. The module connector has 314 edge fingers that mate with a low profile 314 pin 0.5mm pitch right angle connector (this connector is sometimes identified as an 321 pin connector, but 7 pins are lost to the key).
●Featuring NVIDIA’s Tegra T30 System-on-Chip, Kontron’s SMARC sAT30 offers LVDS, Parallel LCD, HDMI Display, GigabitEthernet ,PCIe,SATA,USB,USBOTG, Camera support and superior graphicsperformance in a cost effective, low power, miniature package. Kontron’s SMARC sAT30 thin and robust design makes it an ideal building block for reliable system design.
■Features
●SMARC compliant in an 82mmx 50mm form factor.
●NVIDIA Tegra 3 quad-core ARM Cortex A9 SoC
▲Up to 1.3GHz operation (Quad core operation, restricted temperature range).
▲Up to 1.2 GHz operation (Quad core, over 0 – 60 °C temp range, with appropriate heat sink).
▲Up to 1.4 GHz operation (Single coremode).
●Up to 2GB of DDR3 SDRAM support.
●On-board NAND flash (eMMC) support up to 64GB.
●On-board Intel I210 (Springville) GbE controller.
●Single channel 18bit LVDS display support( 24 bit/18 bit compatible as well).
●24 bit parallel LCD display support.
●HDMI output.
●1.8V Module I/O support.
●GPIO support.
●SDIOsupport.
●I2S support.
●I2C support.
●TwoSerialCamera interfaces (CSI).
●Two PCIe ports.
●USB and USB (On-The-Go®) OTG support.
●Watch Dog Timer (WDT) support.
●UART support.
●SATA support.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2013/2/20 |
|
Revision 1.0 |
|
|
|
4.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.