SMARC-sAMX7 board User Guide
● This manual describes the Smart Mobility ARChitecture (SMARC) sAMX7 (SMX7) board. The Advanced RISC Machines(ARM) based module is equipped with a NXP i.MX7 processor. The single or dual core SoC take advantage of the optimized power consumption and performance ratio.
● The use of this Users Guide implies a basic knowledge of PC hard- and software. This manual is focussed on describing the special features and is not intended to be a standard PC textbook. New users are recommended to study the short installation procedure stated in the following chapter before switching on the power.
● All configuration and setup of the CPU board is either done automatically or manually by the user via the BIOS setup menus.
● Latest revision of this manual, datasheet, BIOS, drivers and BSP's (Board Support Packages) can be downloaded from Kontron Web Page.
■ Description
● The SMARC-sAMX7 is a SMARC half-size module using the NXPs i.MX7 processor with either single or dual core ARM. It is designed on the latest SMARC 2.0 specification. The SMARC-sAMX7 is a highly integrated, embedded computer board.
● Main characteristics of the SMARC-sAMX7 are:
▲ Single/Dual Cortex A7-Core based on NXP's processor i.MX7 Solo with 800 MHz and 2 W max power or i.MX7 Dual with 1000 ▲ MHz and 4 W max power
▲ Up to 2 GB DDR3L memory down
▲ 2 to 64 GBpSLC eMMC (optionally)
▲ 2 to 32 MB0SPI boot flash
▲ LVDS dual channel graphics
▲ MIPI C5I camera interface
▲ 2x USB 2.0 On the Go (OTG)
▲ 4x USB 2.0 Host interface
▲ 2x SPI (1x SPI. lx OSPI/ESPI) both with 2 chip selects
▲ 2x Ethernet (Solo processor 1x Ethernet)
▲ Dual only: 1x PCIe, optional 3x PCIe via bridge
▲ 12x GPIOs
▲ 4x UART, with 32 bit FIFO
▲ 2x CAN Bus interface
▲ Support for audio and common features (SPI, I2C)
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021-March-31 |
|
|
Rev. 1.91 |
|
|
1061-4258 |
|
|
4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
