SMARC-sXAL USER GUIDE
●This manual describes the Smart Mobility ARChitecture (SMARC) sXAL board. The use of this Users Guide implies a basic knowledge of PC hard- and software. This manual is focussed on describing the special features and is not intended to be a standard PC textbook.
●New users are recommended to study the short installation procedure stated in the following chapter before switching on the power.
●All configuration and setup of the CPU board is either done automatically or manually by the user via the BIOS setup menus.
●The SMARC-sXAL is a SMARC half-size module using the Intel Apollo Lake-I processor based on Intel x86 SoC. It is designed on the latest SMARC 2.0 specification.
■Features
●1x channel LPDDR3L support 8x memory down and 1x ECC, support maximum memory size up to 8 Gbyte
●4x PCIe x1 Gen 2
●1x GbE LAN
●2x USB 3.0/2.0 (SMARC port 2,3)
●4x USB2.0 Host (SMARC port 0,1,4,5)
●1x USB2.0 On-the-Go (OTG) (SMARC port 0, via switch of full functional OTG)
●1x Dual Channel LVDS/1x optional eDP
●1x HDMI/optional DP
●1x DP
●Up to 64GB embedded Multimedia Card (eMMC pSLC)
●1x Secure Digital Input Output (SDIO)
●1x SPI external Boot (SPI0)
●1x SPI for generic devices (SPI1)
●1x HDA Audio
●1X I2S Audio
●5x I2C interface
●1x SMB interface, SMBUS via GPIO controlled switch
●2x Camera Serial Interface (CSI) of the Mobile Industry Processor Interface (MIPI-CSI2)
●4x Universal Asynchronous Receiver Transmitter (UART) interfaces
●12x General-purpose input/output (GPIO)
●Onboard Complex Programmable Logic Device (CPLD)
●SMARC short module form factor (82 mm x 50 mm)
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019-06-13 |
|
Rev. 1.93 |
|
1061-8306 |
|
4.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.