ED SERIES AC & DC OUTPUT PLUGGABLE SOLID STATE RELAYS INSTALLATION GUIDE
● Select mounting type. DIN rail mountable (DRSED) and PCB mountable (PCBSED) sockets are sold separately.
● Mounting an ED Series SSR using a DIN rail mountable socket
■Insert ED Series SSR into DRSED socket observing terminals orientation (fig. 1).
■Secure ED SSR using latching mechanism on socket until you hear a clicking sound.
■Install the ED Series SSR / socket on the DIN rail as shown in fig.1
■Wire the socket DRSED to the input/output side (fig. 5). AWG #24 minimum, 2 x AWG #14 (stranded/solid) maximum (0.2-2.1 mm2), choose wire gauge according to load current. Maximum recommended terminal screw torque 5.3-8.85 lb-in (0.60-1.2 Nm) on input/output terminations.
■To retrieve the ED Series SSR from socket, first unlock latching mechanism, as shown in fig.1, then gently pull the SSR.
■Release DRSED socket from DIN rail using a screwdriver. See fig.1.
■If multiple units are installed be sure to follow derating curve.
● Mounting an ED Series SSR using a PCB mountable socket:
■Before mounting the ED Series SSR into the PCBSED socket, first solder PCBSED socket onto PC board.
■When soldering the relay terminals, use a soldering iron of 30 to 60 W, and quickly complete soldering (within approximately 3 seconds). Use a non-corrosive resin flux.
■Insert ED Series SSR into PCBSED socket observing terminals’ orientation (fig. 2).
■Secure ED SSR using latching mechanism on socket until you hear a clicking sound.
■To retrieve the ED Series SSR from socket, first unlock latching mechanism, as shown in fig.2, then gently pull the SSR.
ED SERIES 、 ED24C5R 、 ED24xxx 、 EDxxx5 、 ED10x10 、 EDxxxx 、 PCBSED 、 DRSED 、 ED24x5 、 ED24x3 |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
06/01/2021 |
|
Rev. 06/01/2021 |
|
|
|
183 KB |
- +1 Like
- Add to Favorites
Recommend
- Gens ace Advanced Series begins a new generation of RC smart battery
- Boyd Acquires Sensata’s Thermal Test and Controls Business
- Nextron NXMed Series The Most Comprehensive Single-Use Medical Connector
- 24-Bit Digital High Precision Differential Pressure Sensor ASM10D Series, Pressure Ranges from ±1kPa to ±1000kPa
- AC DC Power Supply SD Series Known for Their High Performance, Reliability, and Efficiency
- Knowles Introduced the MD Series, A Range of Medical-grade Capacitors for Implantable Designs
- SD Series AC DC Power Supply: Efficient and Reliable Power Solutions
- Nippon Chemi-Con Developed HXD and HSD Series Conductive Polymer Hybrid Aluminum Electrolytic Capacitors by Adding 80V Rated Voltage Products
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.