IMP5226 18-Line Plug and Play SCSI Terminator
●IMP's new architecture employs high-speed adaptive elements for each channel, thereby providing the fastest response possible - typically 35MHz, which is 100 times faster than the older linear regulator terminator approach. The bandwidth of terminators based on the older regulator/resistor terminator architecture is limited to 500kHz since a large output stabilization capacitor is required.
●The IMP architecture eliminates the external output compensation capacitor and the need for transient output capacitors while maintaining pin compatibility with first generation designs. Reduced component count is inherent with the IMP5226.
●The IMP5226 architecture tolerates marginal system designs. A key improvement offered by the IMP5226 lies in its ability to insure reliable, error-free communications even in systems which do not adhere to recommended SCSI hardware design guidelines, such as improper cable lengths and impedance. Frequently, this situation is not controlled by the peripheral or host designer.
●The IMP5226 can be placed in a sleep mode with a high logic signal. In the sleep mode the outputs are in a high impedance state. Quiescent current is less than 150μA when disabled.
●The IMP5226 is a superior pin-for-pin replacement for the LX5226, LX5207, UC5601/5602 and the UCC5610.
●Key Features
■Ultra-Fast response for Fast-20 SCSI
■35MHz channel bandwidth
■Sleep-mode current less than 150μA
◆Disconnects terminator from lows
■NO external compensation capacitors
■Compatible with active negation drivers
■Compatible with passive and active terminations
■Approved for use with SCSI 1, 2, 3 and Ultra SCSI
■Hot-swap compatible
■Pin-for-pin compatible with LX5226, LX5207 and UCC5610
IMP5111 、 IMP5112 、 IMP5115 、 IMP5121 、 IMP5218 、 IMP5219 、 IMP5225 、 IMP5226 、 IMP5241 、 IMP5242 、 IMP5226CDWP 、 IMP5226CDWPT 、 IMP5226CDB 、 IMP5226CDBT |
|
18-channel SCSI terminator 、 18-Line Plug and Play SCSI Terminator |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOWB;SSOP;SOWB-28;SSOP-28 |
|
English Chinese Chinese and English Japanese |
|
08/08/05 |
|
Revision:A |
|
|
|
150 KB |
- +1 Like
- Add to Favorites
Recommend
- XBLW Xinbole Analog Chips: Signal Chain Chips (Part 3)
- Silicone Foam is Suitable for the Areas such as Electrical appliances, Various pipelines, and New Energy Vehicles
- ONPOW Developed Plastic Push Button Switch such as ONPOW26 Series Meets the Needs of Industrial Equipment
- SKG092DB Single Beidou Positioning Module that Supports Receiving Satellite Signals Such as BDSB1I and B1C
- China XXYY Series DC-DC Converters Manufacture for A Wide Range of Applications Such as Telecommunications,Medical Equipment
- Why DM Series DC DC Power Supply Has Gained Such Popularity in the Market
- Bi-direction ESD Protection Diode ESDBVD5V0C2 for Applications such as HDMI, Display Port TM, and MDDI Interfaces
- Visit Nisshinbo at 2024 IEEE MTT-S International Microwave Symposium at June 18 through June 21, 2024
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.