IMP5111/5112 9-Line SCSI Terminator - 35MHz Channel Bandwidth
●IMP's new architecture employs high-speed adaptive elements for each channel, thereby providing the fastest response possible - typically 35MHz, which is 100 times faster than the older linear regulator terminator approach. The bandwidth of terminators based on the older regulator/resistor terminator architecture is limited to 500kHz since a large output stabilization capacitor is required. The IMP architecture eliminates the external output compensation capacitor and the need for transient output capacitors while maintaining pin compatibility with first generation designs. Reduced component count is inherent with the IMP5111/5112.
●The IMP5111/5112 architecture tolerates marginal system designs. Akey improvement offered by the IMP5111/5112 lies in its ability to insure reliable, error-free communications even in systems which do not adhere to recommended SCSI hardware design guidelines, such as improper cable lengths and impedance. Frequently, this situation is not controlled by the peripheral or host designer.
●For portable and configurable peripherals, the IMP5111/5112 can be placed in a sleep mode with a disconnect signal. Quiescent current is less than 275μA when disabled. When disabled, the outputs are in a high impedance state with output capacitance less than 3pF.
●Key Features
■Ultra-Fast response for Fast-20 SCSI applications
■35MHz channel bandwidth
■3.3V operation
■Less than 3pF output capacitance
■Sleep-mode current less than 275μA
■Thermally self limiting
■No external compensation capacitors
■Implements 8-bit or 16-bit (wide) applications
■Compatible with active negation drivers (60mA/channel)
■Compatible with passive and active terminations
■Approved for use with SCSI 1, 2, 3 and UltraSCSI
■Hot swap compatible
■Pin-for-pin compatible with LX5211 and UC5606 (IMP5111)
■Pin-for-pin compatible with LX5212 and UC5603/5613/5614 (IMP5112)
IMP5111CDP 、 IMP5111CDPT 、 IMP5111CPWP 、 IMP5111CPWPT 、 IMP5112CDP 、 IMP5112CDPT 、 IMP5112CPWP 、 IMP5112CPWPT 、 IMP5111 、 IMP5112 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SO-16;TSSOP-24;TSSOP;SO;PW;DW |
|
English Chinese Chinese and English Japanese |
|
08/08/05 |
|
Revision:A |
|
|
|
161 KB |
- +1 Like
- Add to Favorites
Recommend
- XBLW Xinbole Analog Chips: Signal Chain Chips (Part 3)
- Silicone Foam is Suitable for the Areas such as Electrical appliances, Various pipelines, and New Energy Vehicles
- ONPOW Developed Plastic Push Button Switch such as ONPOW26 Series Meets the Needs of Industrial Equipment
- SKG092DB Single Beidou Positioning Module that Supports Receiving Satellite Signals Such as BDSB1I and B1C
- China XXYY Series DC-DC Converters Manufacture for A Wide Range of Applications Such as Telecommunications,Medical Equipment
- Why DM Series DC DC Power Supply Has Gained Such Popularity in the Market
- Bi-direction ESD Protection Diode ESDBVD5V0C2 for Applications such as HDMI, Display Port TM, and MDDI Interfaces
- ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.