RO4835™ Laminate Data Sheet
●Features and Benefits
■Significantly improved oxidation resistance compared to typical thermoset microwave materials
◆Designed for performance sensitive, high volume applications.
■Low loss
◆Excellent electrical performance allows application with higher operating frequencies.
◆Ideal for automotive applications.
■Tight dielectric constant tolerance
◆Controlled impedance transmission lines
■Lead-free process compatible
◆No blistering or delamination
■Low Z-axis expansion
◆Reliable plated through holes
■Low in-plane expansion coefficient
◆Remains stable over an entire range of circuit processing temperatures
■CAF resistan
●Oxidation affects all thermoset laminate materials over time and temperature, including FR-4. In the long term, oxidation can lead to small increases in dielectric constant and dissipation factor of the circuit substrate. The rate of change and impact on circuit performance depends on design and operating temperature. For applications demanding greater stability at elevated temperatures Rogers has developed RO4835™ laminate, that is significantly more resistant to oxidation than other hydrocarbon based materials.* Moreover, RO4835 material provides nearly identical electrical and mechanical properties to RO4350B™ laminates, which customers have used successfully for many years. As part of the RO4000® hydrocarbon ceramic laminate family, RO4835 laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at a competitive price.
●The selection of laminates typically available to designers is significantly reduced once operational frequencies increase to 500 MHz and above. RO4000® material possesses the properties needed by designers of RF microwave circuits and matching networks and controlled impedance transmission lines. Low dielectric loss allows RO4000 series material to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. RO4000 material’s thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4000 material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer board constructions. The low Z-axis CTE of RO4000 laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4000 series material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.
●RO4000 series laminates can easily be fabricated into printed circuit boards using standard FR-4 circuit board processing techniques. Unlike PTFE based high performance materials, RO4000 series laminates do not require specialized via preparation processes such as sodium etch. This material is a rigid, thermoset laminate that is capable of being processed by automated handling systems and scrubbing equipment used for copper surface preparation. RO4835 laminates utilize RoHS compliant flame-retardant technology for applications requiring UL 94V-0 certification. These materials conform to the requirements of IPC-4103, slash sheet /11.
|
RO4835™ 、 RO4835 、 RO4000 、 RO4000 series 、 RO4350B™ 、 RO4000® |
|
|
[ Automotive Radar ][ Sensors ][ Point-to point Microwave ][ Power Amplifiers ][ Phased - Array Radar ][ RF Components ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
080422 |
|
|
|
|
|
92-160 |
|
|
659 KB |
- +1 Like
- Add to Favorites
Recommend
- Rogers Announces Acquisition of Silicone Engineering
- Sekorm Became an Authorized Distributor of Rogers
- Rogers Announces Termination of Merger Agreement with DuPont
- Rogers Corporation Introduces New Water-Resistant Flexible Heater Substrate
- Rogers‘ Micro Channel Coolers (MCC) in High Performance Computing (HPC) Applications
- Air Cooled VCSEL Applications with Rogers Micro-Channel-Coolers (MCC)
- Rogers‘ Advanced Laminates Power The Mars Exploration of NASA
- Rogers developed Thermal Simulation Tools to Accelerate Time to Market
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
