SA326 transmitter module Product Specification
SA326 series products are divided into transmitter module SA326-TX and receiver moduleSA326-RX. This product is an application board for SA316-TX and SA316-RX modules. It can work after power-on.You can also directly set the frequency of the module with PC software. , Sound sizeand other parameters,greatly simplify the user's development difficulty, this product is widely used in occasions with relatively high sound quality requirements.
●Features
■UHF frequency band: 868 MHz
■Frequency response: 20 Hz-20 KHz
■UHF frequency band: 500~980 MHz
■The delay from microphone input to audio
■VHF frequency band: 160~270 MHz
■output is less than 3ms
■The transmission distance is 200 meters in the open area
■Digital modulation method: pi/4 DQPSK
■Occupied bandwidth: <300 KHz
■Receiving sensitivity: -96 dBm
■Transmission rate 204.8 Ksps
■Audio signal to noise ratio: 96 dB
■Sampling rate: 48 KHz
[ Wired speakers become wireless speakers ][ wireless microphone ][ Wireless Headphones ][ High-quality wireless audio transmission ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022-4 |
|
V1.1 |
|
|
|
2.2 MB |
- +1 Like
- Add to Favorites
Recommend
- What Features Should a Portable Walkie-Talkie Module Have? Take G-NiceRF SA828 for An Example
- The Gas Meter Reading Application of RF Module RF4463Pro from G-NiceRF Saves Much Person Resource
- Advantages of G-NiceRF ASK Transmitter STX883Pro and ASK Receiver SRX883Pro in the Market
- G-NiceRF SA316 Series Audio Transmission Module - Upgraded Transmission Distance with Uncompromised Sound Quality
- G-NiceRF BLE5201 Module Communication Distance Testing Reaches 150m
- G-NiceRF LoRa Backscatter Device LoRa1276-C1 Provides Long-Range Communication with Low-Power
- G-NiceRF‘s FCC Certified Products for Wireless Transceiver Module: LoRa1276-915, RF2401PRO, RF2401F20, RF4463PRO
- G-NiceRF’s New LoRa Spread Spectrum Modulation SOC Wireless Module LoRa-STM32WLE5 with Built-in ARM and Industrial Grade Crystal Oscillator
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.