Si446x/Si4362 RX LNA Matching

2022-05-20

●Introduction
■The purpose of this application note is to provide a description of the impedance matching of the RX differential low noise amplifier (LNA) on the Si446x/Si4362 family of RFICs.
■It is desired to simultaneously achieve two goals with the matching network:
◆Match the LNA input to the antenna source impedance (e.g., 50Ω) ◆Provide a single-ended-to-differential conversion function (i.e., a balun)
■The matching procedure outlined in this document provides for achieving the goals listed above.
■For those users who are not interested in the theoretical derivation of the match network, but are just concerned with quickly obtaining matching component values, refer to the Summary Tables shown in "4.1.7. Summary Tables of 3-Element Match Network Component Values vs. Frequency" on page 12 and "4.2.7. Summary Tables of 4-Element Match Network Component Values vs. Frequency" on page 19.
■Measurements were performed on the Si4461-B0 chip but are applicable to other members of the Si446x family of chips (e.g. Si446x-B1, C0, C1, C2 and the Si4362 chip).

Silicon Labs

Si446xSi4362

More

Part#

RX differential low noise amplifierRFICs

More

More

Technical Documentation

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2017/07/27

Rev. 0.4

AN643

3.5 MB

- The full preview is over. If you want to read the whole 26 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: