FE Series MEDIUM TEMPERATURE CONSTANT WATTAGE HEATING CABLE
●Low Watt Density
●Parallel Resistance Heater
●Cut-to-Length at the Job Site
●Constant Watt Density
●Moisture and Chemical Resistance
●Low Cost
●Metal Overbraid
■The FE cable heating element is tension wrapped and covered with a fluorocarbon film and enclosed in a minimum 20 mil FEP abrasion resistant extruded jacket. This tough outer cover provides moisture and dielectric protection as well as resistance to abrasion.
■A tinned copper overbraid provides additional protection and electrical ground return path.
FE Series 、 FE3-120B 、 FE3-240B 、 FE5-120B 、 FE5-240B 、 FE8-120B 、 FE8-208B 、 FE8-240B 、 FE8-277B 、 FE8-480B 、 FE12-120B 、 FE12-208B 、 FE12-240B 、 FE12-277B |
|
MEDIUM TEMPERATURE CONSTANT WATTAGE HEATING CABLE 、 low-watt density electrical resistance heater |
|
[ freeze protection ][ midrange process temperature control ][ maintenance applications in lines ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2009/9/16 |
|
|
|
|
|
334 KB |
- +1 Like
- Add to Favorites
Recommend
- The SLE Series Expands SL Power‘s Lean Line Ranging from 6 to 36 Watts
- Nippon Chemi-Con Developed HXE Series Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Guaranteeing 4000 Hours at 135℃
- OWON Has Demonstrated its XSA1000 Series, OWP-H, SPE Series, XDM Series in the 2023 Hong Kong Electronics Show
- Nippon Chemi-Con Updates KHE Series Snap-in Type Aluminum Electrolytic Capacitors with Approximately 20% Higher Capacitance
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- OWON SPE Series DC Power Supply with Maximum Output Voltage of 60V and The Maximum Output Current of 10A
- Chroma Launches 62000E Series 1U DC Power Supply with 3-channel Output Based on High Power Density Design
- Nippon Chemi-Con Developed DXE Series Low-Resistance Electric Double Layer Capacitors with High Capacitance Low-Resistance Products [3000F, 0.3mΩ (typ.)]
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.