AD7389-4 Differential Input, Quad, Internal Reference Simultaneous Sampling, 16-Bit SAR ADC
2022-05-18
■FEATURES
●16-bit ADC family
●Quad simultaneous sampling
●Fully differential analog inputs
●Wide common-mode range
●High throughput rate: 2 MSPS
●Buffered 2.5 V internal voltage reference (10 ppm/°C)
●On-chip oversampling function
●INL (maximum): 2 LSBs
●SNR (typical)
◆90.5 dB at VREF = 2.5 V
◆97.9 dB at RES = 1, OSR = 8× rolling average oversampling
●2-bit resolution boost
●Out of range indicator (ALERT)
●High-speed serial interface
●−40°C to +125°C operation
●4 mm × 4 mm, 24-lead LFCSP
■GENERAL DESCRIPTION
●The AD7389-4 a 16-bit, quad, simultaneous sampling, high speed, successive approximation register (SAR), analog-to-digital converter (ADC) that operates from a 3.0 V to 3.6 V power supply and features throughput rates up to 2 MSPS. The analog input type is differential, accepts a wide common-mode input voltage, and the analog inputs are sampled and converted on the falling edge of CS.
●The AD7389-4 has on-chip oversampling blocks to improve dynamic range and reduce noise at lower bandwidths. The oversampling can boost up to two bits of added resolution. A buffered internal 2.5 V reference (10 ppm/°C) is included.
●The conversion process and data acquisition use standard control inputs allowing for easy interfacing to microprocessors or digital signal processors (DSPs). The conversion result can clock out simultaneously via 4-wire mode for faster throughput or via 1-wire serial mode when slower throughput is allowed. The device is compatible with 1.8 V, 2.5 V, and 3.3 V interfaces, using the separate logic supply.
●The AD7389-4 is available in a 24-lead lead frame chip scale package (LFCSP) with operation specified from −40°C to +125°C.
■PRODUCT HIGHLIGHTS
●Quad simultaneous sampling and conversion.
●Pin-compatible product family.
●High throughput rate, 2 MSPS at 16-bit.
●Space-saving, 4 mm × 4 mm LFCSP.
●Integrated oversampling block to increase dynamic range, reduce noise and reduce SCLK speed requirements.
●Differential analog inputs with wide common-mode range.
●Small sampling capacitor reduces amplifier drive burden.
●16-bit ADC family
●Quad simultaneous sampling
●Fully differential analog inputs
●Wide common-mode range
●High throughput rate: 2 MSPS
●Buffered 2.5 V internal voltage reference (10 ppm/°C)
●On-chip oversampling function
●INL (maximum): 2 LSBs
●SNR (typical)
◆90.5 dB at VREF = 2.5 V
◆97.9 dB at RES = 1, OSR = 8× rolling average oversampling
●2-bit resolution boost
●Out of range indicator (ALERT)
●High-speed serial interface
●−40°C to +125°C operation
●4 mm × 4 mm, 24-lead LFCSP
■GENERAL DESCRIPTION
●The AD7389-4 a 16-bit, quad, simultaneous sampling, high speed, successive approximation register (SAR), analog-to-digital converter (ADC) that operates from a 3.0 V to 3.6 V power supply and features throughput rates up to 2 MSPS. The analog input type is differential, accepts a wide common-mode input voltage, and the analog inputs are sampled and converted on the falling edge of CS.
●The AD7389-4 has on-chip oversampling blocks to improve dynamic range and reduce noise at lower bandwidths. The oversampling can boost up to two bits of added resolution. A buffered internal 2.5 V reference (10 ppm/°C) is included.
●The conversion process and data acquisition use standard control inputs allowing for easy interfacing to microprocessors or digital signal processors (DSPs). The conversion result can clock out simultaneously via 4-wire mode for faster throughput or via 1-wire serial mode when slower throughput is allowed. The device is compatible with 1.8 V, 2.5 V, and 3.3 V interfaces, using the separate logic supply.
●The AD7389-4 is available in a 24-lead lead frame chip scale package (LFCSP) with operation specified from −40°C to +125°C.
■PRODUCT HIGHLIGHTS
●Quad simultaneous sampling and conversion.
●Pin-compatible product family.
●High throughput rate, 2 MSPS at 16-bit.
●Space-saving, 4 mm × 4 mm LFCSP.
●Integrated oversampling block to increase dynamic range, reduce noise and reduce SCLK speed requirements.
●Differential analog inputs with wide common-mode range.
●Small sampling capacitor reduces amplifier drive burden.
- +1 Like
- Add to Favorites
Recommend
More>
- EPC GaN FETs Deliver Benchmark Power Density and Efficiency for DC/DC Conversion
- Keysight Technologies and Analog Devices Demonstrate Latest O-RAN Technology at Mobile World Congress 2022
- Keysight Signs Memorandum of Understanding with Analog Devices to Advance 6G Technology Design and Development
- SMART Modular Announces the SMART Kestral PCIe Optane Memory Add-in-Card to Enable Memory Expansion and Acceleration
- Bluetooth® 5.3 – What‘s New for IoT Device Makers and Application Developers?
- Should DC-DC Or LDO Be Used?
- GaN Transistor for Several Power Applications
- Cmsemicon, Representing the New Power of China, Won the Domestic Power Device Industry Excellence Award
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.