STD400 Duct Average Temperature Transmitter 4-20 mA
■STD400 is an electronic average transmitter that converts the average from temperature measurements into one electric current signal 4 – 20 mA.
■The transmitter is used for temperature measurement in air ducts.
■Two versions available:
▲The transmitter with an immersion length of 0,4 m. The measurement is done at 5 points equally spread over the length.
▲A copper tube protects the 5 measuring points. The tube can be bent max R = 50 mm to accomodate the shape of the duct.
▲For larger ducts use the transmitters with immersion length of 3 m or 6 m. The measurement is done over the entire sensor length.
■The transmitter is delivered as a complete unit, comprising a junction box with amplifier and sensors.
■The transmitter shall be connected with a 2-wire cable, which serves both as power supply and for signal transmission.
■The reading of the measured signal is done over an external load resistance.
0-069-2069-0 、 0-069-2071-0 、 0-069-2073-0 、 0-069-2075-0 、 0-069-2077-0 、 0-069-2079-0 |
|
[ temperature measurement ][ air duct ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2011/7/23 |
|
|
|
03-00209-01-en |
|
307 KB |
- +1 Like
- Add to Favorites
Recommend
- How Network Segmentation Can Mitigate Pipedream Attacks on Critical Infrastructure
- The Newest Version of Kinco HMI Software Kinco DTools V3.5.3 Which was Added Many IoT Functions
- Greenconn to Exhibit at Nepcon Southeast Asia with Its Connector Products and Customized Solutions
- Amphenol-GIS Busbars for SPD Type 2 to Meet a Fast and Pre-assembled Wiring
- In-depth Understanding of the Connection Types of Industrial Connectors
- What Role Do Industrial Connectors Play and What Characteristics Do They Have?
- Application Areas of Board-to-Board Connector Terminals
- British electronic chemical manufacturer Electrolube settled in Sekorm
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.