SDS6000A Series Digital Storage Oscilloscope
●SIGLENT’s SDS6000A series Digital Storage Oscilloscopes are available in bandwidths of 2 GHz, 1 GHz and 500 MHz, have sample rate of 5 GSa/s (10 GSa/s ESR) at each channel, maximum record length of 500 Mpts/ch, and display up to 4 analog channels + 16 digital channels mixed signal analysis ability.
●The SDS6000A series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 170,000 wfm/ s (normal mode, up to 750,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. Tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis and Eye/Jitter Analysis allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS6000A.
●The large 12.1" display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly UI design, can greatly improve the operation efficiency. It also supports mouse control, and remote web control over LAN.
■Key Features:
●4 analog channels, up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample rate at each channel
●Low background noise, supports 0.5 mV/div to 10 V/div vertical scales
●SPO technology
◆Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s (sequence mode)
◆Supports 256-level intensity grading and color temperature display modes
◆500 Mpts Record length in total for all 4 channels
◆Digital trigger system
●Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Zone Trigger simplifies advanced triggering
●Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
●Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
●History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
●Automatic measurements on 50+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math, History and Ref
●4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), supports formula editor
●Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot, Power Analysis and Eye/Jitter Analysis
●High Speed hardware-based Average, Hi-Res; High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defined masks
●16 digital channels (optional)
●25 MHz function / arbitrary waveform generator, built-in multiple predefined waveforms
●Large 12.1” TFT-LCD display with 1280 * 800 resolution; Capacitive touch screen supports multi-touch gestures
●Interfaces include: USB Hosts, USB Device (USBTMC), LAN(VXI-11/Telnet/Socket), micro SD card, Pass/Fail, Trigger Out, HDMI
●Built-in web server supports remote control over the LAN port using a web browser. Supports SCPI remote control commands. Supports external mouse and keyboard
SDS6000A Series 、 SDS6000A 、 SDS6054A 、 SDS6104A 、 SDS6204A 、 SAG1021I 、 SDS6000Pro-FG 、 SDS6000Pro-16LA 、 SPL2016 、 DF2001A 、 SDS6000Pro-PA 、 SDS6000Pro-I2S 、 SDS6000Pro-1553B 、 SDS6000Pro-FlexRay 、 SDS6000Pro-CANFD 、 SDS6000Pro-SENT 、 SDS6000Pro-Manch 、 SDS6000-4BW10 、 SDS6000-4BW20 、 STB3 、 SAP1000 、 SAP2500 、 HPB4010 、 SAP2500D 、 BAG-S2 、 SDS6000-RMK 、 DPB1300 、 DPB4080 、 DPB5150 、 DPB5150A 、 DPB5700 、 DPB5700A 、 CPL5100 、 CP4020 、 CP4050 、 CP4070 、 CP4070A 、 CP5030 、 CP5030A 、 CP5150 、 CP5500 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/2/8 |
|
|
|
EN01B |
|
2.9 MB |
- +1 Like
- Add to Favorites
Recommend
- NOVOSENSE Announced the New NSOPA Series of General-Purpose Operational Amplifiers for Automotive and Industrial Applications
- Snap-in Type Aluminum Electrolytic Capacitors RLA Series Offered A Capacitance Range of 600 to 2200µF for Home Appliances
- Nippon Chemi-Con Developed Snap-in Type Aluminum Electrolytic Capacitors RLB Series with High Ripple and RLA Series with Longer Life
- Nidec Develops CA Series Linear Vibration Motors with Smallest-class Diameters in the World
- NIPPON CHEMI-CON Snap-in Type KVA Series Capacitators is AEC-Q200 Compliant with Endurance up to 105℃ 2000hrs
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
- NIPPON CHEMI-CON Snap-in Type LVA Series Aluminum Capacitators, AEC-Q200 Compliant for OBC
- Nippon Chemi-Con Developed KLA Series Snap-in Type Aluminum Electrolytic Capacitors with High Ripple and High Temperature Resistance
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.