PA12 PA12A Power Operational Amplifier
■The PA12 is a state of the art high voltage, very high output current operational amplifier designed to drive resistive, inductive and capacitive loads. For optimum linearity, especially at low levels, the output stage is biased for class A/B operation using a thermistor compensated base-emitter voltage multipliercircuit. The safe operating area (SOA) can be observed for all operating conditions by selection of user programmable current limiting resistors. For continuous operation under load, a heatsink of proper rating is recommended.The PA12 is not recommended for gains below -3 (inverting) or +4 (non-inverting).
■This hybrid integrated circuit utilizes thick film (cermet) resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures. The 8-pin TO-3 package is hermetically sealed and electrically isolated. The use of compressible isolation washers voids the warranty.
●FEATURES
■LOW THERMAL RESISTANCE — 1.4°C/W
■CURRENT FOLDOVER PROTECTION — NEW
■HIGH TEMPERATURE VERSION — PA12H
■EXCELLENT LINEARITY — Class A/B Output
■WIDE SUPPLY RANGE — ±10V to ±50V
■HIGH OUTPUT CURRENT — Up to ±15A Peak
Power Operational Amplifier 、 high voltage, very high output current operational amplifier |
|
[ MOTOR CONTROL ][ VALVE CONTROL ][ ACTUATOR CONTROL ][ MAGNETIC DEFLECTION CIRCUITS ][ POWER TRANSDUCERS ][ TEMPERATURE CONTROL ][ PROGRAMMABLE POWER SUPPLIES ][ AUDIO AMPLIFIERS ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TO-3 |
|
English Chinese Chinese and English Japanese |
|
2012/10/10 |
|
REVV |
|
PA12U |
|
521 KB |
- +1 Like
- Add to Favorites
Recommend
- Ventec to Showcase New Range of High-performance PCB laminates and Prepregs at IPC APEX Expo 2023
- At IPC APEX Expo 2022 in San Diego,Ventec premiered ‘aerolam‘ in the US market,curated for aerospace & defense applications
- Bare Die SiC from ROHM Chosen by Apex Microtechnology for Newest Line of Power Modules, Saving Space and Increasing Performance
- West Australian Heavy Industries Benefit from Coherent Direct-Diode Laser Technology for Efficient Component Cladding
- Ventec Launches New Highest Thermal Conductive Metal Base Laminate VT-4BC for IGBT & Power Markets with a Thermal Conductivity of 10W/mK
- TDK Launches High-performance 6-axis IMU with Industry-leading Motion Sensor Performance for IOT, Robotics, AR/VR and Wearable Applications
- TDK Launches SmartMotion™ Ultra-high-performance 6-axis Motion Sensor ICM-45xxx with World’s First BalancedGyro™ Technology
- How to Define the Three Value Standards of the End Face of the Patchcord?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.