Type 202566 JUMO AQUIS 500 Ci Transmitter/Controller for Inductive Conductivity,Concentration and Temperature Operating Instructions
■General information
▲The JUMO AQUIS 500 CI is used for the inductive measurement / control of electrolytic conductivity or of the concentration of liquids. With this device, it is also possible to display the measured conductivity in accordance with a specifically customized table.
▲Inductive JUMO measuring cells can be connected to the device.
▲Temperature measurement is performed with a Pt100/1000, as a second input variable. Specific, automatic temperature compensation is possible here,depending on the measurement variable.
▲The device is operated by keys, and has a large, easily legible graphic display.Parameters are displayed in plain text, making configuration easier for the user and helping with the proper programming of the device.
▲Input signals can be shown as numbers or as a bar graph on the graphic display. Parameters are displayed in plain text for easily comprehensible and secure operation.
▲With two optional relay switching contacts, it is possible to implement both simple switching or alarm functions and demanding control tasks with P, PI,PD and PID action. If required, the device can also be provided with two freely configurable and scalable analog outputs (0 - 10 V or 0(4) - 20 mA).
■Advantages
▲With the inductive measurement method, acquisition of the specific conductivity is largely maintenance-free, even in difficult medium conditions.Unlike the conductive measurement method, problems such as electrode breakdown and polarization simply do not occur.
▲Because temperature measurement is integrated, temperature compensation takes place quickly and precisely, which is particularly important when measuring conductivity.
■Typical areas of application
▲Particularly recommended is use in media in which heavy deposits from contaminants, oil and grease, or gypsum and lime precipitation are to be expected.
▲According to which sensor is connected, the device can be used in
◆fresh water and waste water
◆air conditioning systems and cooling tower monitoring
◆swill tanks (e.g. electroplating plant monitoring)
◆feed and final control in in-house wastewater treatment plants
◆concentration monitoring
◆vehicle washers
◆CIP cleaning (Clean In Place / Process)
◆concentration monitoring and chemicals dosing
◆food, drinks and pharmaceutical industries (monitoring phase separation)
●Key features
■Display: mS/cm, μS/cm, g/l, etc.Special visualizations can also be configured with the setup program.
■Large, backlit LC graphic display.
■A choice of display visualizations: large numbers, bar graph or trend display.
■Integrated calibration routines.
■Calibration logbook.
■IP67 enclosure protection for surface mountingIP65 enclosure protection for switch cabinet mounting
■Selectable languages: German, English, French;additional languages can be loaded later through the setup program.
■Through the setup program: user-friendly programming, system documentation, subsequent loading of additional languages.
|
202566 、 202566/10-888-000-000-000-23/000 、 202566/20-888-888-310-310-23/000 、 00398161 、 00483664 、 00477842 、 00398163 、 00453191 、 00506351 、 00483602 、 00456352 、 00544942 、 202711/21 |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/03/30 |
|
|
V1.00 |
|
|
00520244 |
|
|
989 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
