nRF52832 Product Specification
2021-12-28
●Key features
■2.4 GHz transceiver
▲-96 dBm sensitivity in Bluetooth® low energy mode
▲Supported data rates: 1 Mbps, 2 Mbps Bluetooth® low energy mode
▲-20 to +4 dBm TX power, configurable in 4 dB steps
▲On-chip balun (single-ended RF)
▲5.3 mA peak current in TX (0 dBm)
▲5.4 mA peak current in RX
▲RSSI (1 dB resolution)
■Arm® Cortex®-M4 32-bit processor with FPU, 64 MHz
▲215 EEMBC CoreMark® score running from flash memory
▲58 μA/MHz running from flash memory
▲51.6 μA/MHz running from RAM
▲Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM)
▲Serial wire debug (SWD)
▲Trace port
■Flexible power management
▲1.7 V–3.6 V supply voltage range
▲Fully automatic LDO and DC/DC regulator system
▲Fast wake-up using 64 MHz internal oscillator
▲0.3 μA at 3 V in System OFF mode
▲0.7 μA at 3 V in System OFF mode with full 64 kB RAM retention
▲1.9 μA at 3 V in System ON mode, no RAM retention, wake on RTC
■Memory
■512 kB flash/64 kB RAM
■256 kB flash/32 kB RAM
■Nordic SoftDevice ready
■Support for concurrent multi-protocol
■Type 2 near field communication (NFC-A) tag with wakeup-on-field and touch-to-pair capabilities
■12-bit, 200 ksps ADC - 8 configurable channels with programmable gain
■64 level comparator
■15 level low power comparator with wakeup from System OFF mode
■Temperature sensor
■32 general purpose I/O pins
■3x 4-channel pulse width modulator (PWM) unit with EasyDMA
■Digital microphone interface (PDM)
■5x 32-bit timer with counter mode
■Up to 3x SPI master/slave with EasyDMA
■Up to 2x I2C compatible 2-wire master/slave
■I2S with EasyDMA
■UART (CTS/RTS) with EasyDMA
■Programmable peripheral interconnect (PPI)
■Quadrature decoder (QDEC)
■AES HW encryption with EasyDMA
■Autonomous peripheral operation without CPU intervention using PPI andEasyDMA
■3x real-time counter (RTC)
■Single crystal operation
■Package variants
▲QFN48 package, 6 × 6 mm
▲WLCSP package, 3.0 × 3.2
■2.4 GHz transceiver
▲-96 dBm sensitivity in Bluetooth® low energy mode
▲Supported data rates: 1 Mbps, 2 Mbps Bluetooth® low energy mode
▲-20 to +4 dBm TX power, configurable in 4 dB steps
▲On-chip balun (single-ended RF)
▲5.3 mA peak current in TX (0 dBm)
▲5.4 mA peak current in RX
▲RSSI (1 dB resolution)
■Arm® Cortex®-M4 32-bit processor with FPU, 64 MHz
▲215 EEMBC CoreMark® score running from flash memory
▲58 μA/MHz running from flash memory
▲51.6 μA/MHz running from RAM
▲Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM)
▲Serial wire debug (SWD)
▲Trace port
■Flexible power management
▲1.7 V–3.6 V supply voltage range
▲Fully automatic LDO and DC/DC regulator system
▲Fast wake-up using 64 MHz internal oscillator
▲0.3 μA at 3 V in System OFF mode
▲0.7 μA at 3 V in System OFF mode with full 64 kB RAM retention
▲1.9 μA at 3 V in System ON mode, no RAM retention, wake on RTC
■Memory
■512 kB flash/64 kB RAM
■256 kB flash/32 kB RAM
■Nordic SoftDevice ready
■Support for concurrent multi-protocol
■Type 2 near field communication (NFC-A) tag with wakeup-on-field and touch-to-pair capabilities
■12-bit, 200 ksps ADC - 8 configurable channels with programmable gain
■64 level comparator
■15 level low power comparator with wakeup from System OFF mode
■Temperature sensor
■32 general purpose I/O pins
■3x 4-channel pulse width modulator (PWM) unit with EasyDMA
■Digital microphone interface (PDM)
■5x 32-bit timer with counter mode
■Up to 3x SPI master/slave with EasyDMA
■Up to 2x I2C compatible 2-wire master/slave
■I2S with EasyDMA
■UART (CTS/RTS) with EasyDMA
■Programmable peripheral interconnect (PPI)
■Quadrature decoder (QDEC)
■AES HW encryption with EasyDMA
■Autonomous peripheral operation without CPU intervention using PPI andEasyDMA
■3x real-time counter (RTC)
■Single crystal operation
■Package variants
▲QFN48 package, 6 × 6 mm
▲WLCSP package, 3.0 × 3.2
- +1 Like
- Add to Favorites
Recommend
More>
- How to use nordic nrf52832 module for indoor?
- RF-DG-32A USB Sniffer Based on NRF52832 Chip Launched by RF-STAR , Which Supports Major Wireless Standards
- 6 Bluetooth Beacons Based on nrf51822/nRF52832/nRF52810 Chip Solutions
- nRF52840 Chip Bluetooth 5.0 Module: 300m Transmission Distance and 24Mbps Transmission Speed
- RF-STAR RF-DG-40A Dongle——In-Depth Analysis of the Improvement of Nordic‘s Dongle Based on nRF52840
- RF-STAR’s New Modules Adopt NRF52833 Chip Will Come Soon
- User Experience Comparison of Capturing Packet between Wireshark with nRF52832 Sniffer and Packet Sniffer with CC2540 Sniffer
- RF-STAR Bluetooth modules with nRF52811 provide fast BLE for communication between customer products and smart mobile devices solution
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.