tinyAVR® 0-series, ATtiny202/402 Preliminary Datasheet
■The ATtiny202/402 are members of the tinyAVR® 0-series of microcontrollers, using the AVR® processor with hardware multiplier, running at up to 20 MHz, with 2/4 KB Flash, 128/256 bytes of SRAM, and 64/128bytes of EEPROM in an 8-pin package. The tinyAVR® 0-series uses the latest technologies with a flexible, low-power architecture including Event System and SleepWalking, accurate analog features, and Core Independent Peripherals.
●Features
■CPU:
▲AVR® CPU
▲Running at up to 20 MHz
▲Single-cycle I/O access
▲Two-level interrupt controller
▲Two-cycle hardware multiplier
■Memories:
▲2/4 KB In-system self-programmable Flash memory
▲64/128B EEPROM
▲128/256B SRAM
▲Write/erase endurance:
◆Flash: 10,000 cycles
◆EEPROM: 100,000 cycles
▲Data retention: 40 years at 55°C
■System:
▲Power-on Reset (POR)
▲Brown-out Detector (BOD)
▲Clock Options:
◆16/20 MHz low-power internal RC oscillator
◆32.768 kHz Ultra Low-Power (ULP) internal RC oscillator
◆External clock input
▲Single-pin Unified Program and Debug Interface (UPDI)
▲Three sleep modes:
◆Idle with all peripherals running for immediate wake-up
◆Standby
▲Configurable operation of selected peripherals
▲SleepWalking peripherals
◆Power-Down with full data retention
■Peripherals:
▲One 16-bit Timer/Counter Type A (TCA) with a dedicated period register and three comparechannels
▲One 16-bit Timer/Counter Type B (TCB) with input capture
▲One 16-bit Real-Time Counter (RTC) running from internal RC oscillator
▲Watchdog Timer (WDT) with Window mode, with a separate on-chip oscillator
▲One USART with fractional baud rate generator, auto-baud, and start-of-frame detection
▲One master/slave Serial Peripheral Interface (SPI)
▲One Two-Wire Interface (TWI) with dual address match
◆Philips I²C compatible
◆Standard mode (Sm, 100 kHz)
◆Fast mode (Fm, 400 kHz)
◆Fast mode plus (Fm+, 1 MHz)
▲One Analog Comparator (AC) with a low propagation delay
▲One 10-bit 115 ksps Analog-to-Digital Converter (ADC)
▲Multiple voltage references (VREF):
◆0.55V
◆1.1V
◆1.5V
◆2.5V
◆4.3V
▲Event System (EVSYS) for CPU independent and predictable inter-peripheral signaling
▲Configurable Custom Logic (CCL) with two programmable look-up tables
▲Automated CRC memory scan (CRCSCAN)
▲External interrupt on all general purpose pins
■I/O and Packages:
▲Six programmable I/O lines
▲8-pin SOIC150
■Temperature Ranges:
▲-40°C to 105°C
▲-40°C to 125°C
■Speed Grades:
▲0-5 MHz @ 1.8V - 5.5V
▲0-10 MHz @ 2.7V - 5.5V
▲0-20 MHz @ 4.5V - 5.5V
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOIC150 |
|
English Chinese Chinese and English Japanese |
|
07/2019 |
|
Rev. B |
|
DS40001969B |
|
3.3 MB |
- +1 Like
- Add to Favorites
Recommend
- ATP SATA SSDs Qualify for Compatibility and Interoperability with Microchip‘s New Tri-Mode Storage Adapters
- Taitien Introduced O3 TYPE Tiny Size High Precision Crystal Oscillator Whose Rise and Fall Times Within 10ns
- A Tiny RX23E-A Board for Digital Load Cell
- Melexis Squeezes Ultimate Performance in a Tiny 3D Magnetometer MLX90394
- Renesas‘ New RA MCU Group Delivers Ultra-Low Power, Innovative Peripheral Functions In Tiny Package
- Reset IC KTS1612 by Kinetic Technologies Extends Battery Life and Improves User Experienceall in a Tiny UQFN Package
- Moving Machine Learning To The Tiny Edge
- SRL23 High Current Schottky Diodes: Adopt Tiny PowerSOD-323/DO-219AD Package
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.