Variant 3 (110 kV) Modular Cable Fault Location System USER GUIDE
■The Variant 3 (110 kV) combines the proven individual devices of the Megger range of products in almost any configuration combination in a test van system for the cable series up to 30 kV.
■The main component of this system is the system control panel NSF 8 which, depending on the selected operating mode, switches the HV path and provides the required individual devices with mains voltage. The system control panel integrates all individual units of the test van in a control and safety concept adapted to the requirements of cable testing and fault location.
■While the power and HV clearance is carried out with the NSF 8, the actual operation of the individual devices takes place either directly on the individual devices or on a separate notebook, as is the case with a PD diagnosis system.
●The Variant 3 (110 kV) offers the following features:
■Modular and thus fail-safe system
■Semi-automatic and manual operating mode
■The highest safety standards
SWG 1750 、 BPS 5000-C 、 FLG 200 、 T 22/13 B 、 BPS 5000-HV 、 FLE 10 、 MFM 10 |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
12/2018 |
|
Issue: 3 |
|
86398 |
|
3.3 MB |
- +1 Like
- Add to Favorites
Recommend
- What is the difference between an AC Source and an AC Grid Emulator?
- 需要充电吗?具有开尔文源引脚的SiC MOSFET DIF120SIC053-AQ加速电动汽车充电过程
- Archimedes Semiconductor: Provider of High-Performance SiC/IGBT Power Semiconductors for New Energy Vehicles and Photovoltaic Storage
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- IS6630A/C/D with Three-way Output Enables DDR Power Supply Integration, Saving the Space on the PCB Board And the Required Devices
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.