35SAT225S3R Dual-Bay 2.5” to 3.5” SATA Hard Drive Adapter Enclosure
● This unique dual-bay adapter enclosure gives you an easy and cost-effective way to upgrade legacy systems such as desktop PCs and servers, by letting you install two 2.5" solid-state drives or hard drives into a single 3.5" drive bay.
● The adapter enclosure lets you install newer, higher performing drives such as SSDs into legacy systems that may only support 3.5” hard drives. The enclosure provides a cost-efficient way for companies and organizations to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators and integrators who want to build a system or upgrade a system with limited SATA interfaces to take advantage of the increased drive performance of 2.5” SSDs or increased capacity with support for two drives.
● The adapter enclosure allows you to install two 2.5" SATA drives into an internal or external 3.5-inch bay, such as a drive drawer caddy or tray, or 3.5" drive enclosure. To utilize the full speed potential of your SATA III hard drives, the drive converter supports SATA III for transfer speeds up to 6Gbps. Suitable for drives with a height of up to 9.5 mm, virtually any 2.5" SATA drive can be made to look and function like a 3.5" drive.
● The adapter enclosure is equipped with hardware RAID to provide improved performance and data redundancy. The enclosure supports both RAID 0 and RAID 1 as well as Spanning, and JBOD, and lets you choose your preferred backup mode by simply adjusting the RAID setting switch.
● The RAID 1 functionality is ideal in a hot-swapping server environment, providing a level of security and reliability to your data through data redundancy. With RAID 0 support, you can combine the storage capacity of the two hard drives and achieve faster read and write speeds.
● You can install the adapter enclosure into a desktop PC or server. It offers flexible use in hot-swap bays or in a more fixed, permanent installation in a 3.5” hard-drive mounting bay with standard mounting holes. Once installed, you simply slide two 2.5” HDDs/SSDs into the adapter enclosure, with no tools required. The aluminum housing protects installed drives in a durable enclosure.
● The 35SAT225S3R is backed by a StarTech.com 2-year warranty and free lifetime technical support.
● Features:
■ Upgrade your system performance by installing two 2.5” SSDs/HDDS in a 3.5" drive bay
■ Features hardware RAID - RAID 0, 1 plus JBOD and spanning to enhance drive performance or add redundancy:
■ Installs easily into internal or external 3.5” drive bays
■ Supports SATA I, II and III (up to 6Gbps)
■ TRIM support for stable performance
■ Durable aluminum housing
[ Upgrade legacy systems ][ desktop PCs ][ servers ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021/11/30 |
|
|
|
|
|
68 KB |
- +1 Like
- Add to Favorites
Recommend
- Let’s Get Started with RX MCU Software Development! First Step Is to Start with e2 Studio!
- PHOENIX CONTACT‘s CONTACTRON Speed Starter:Bridging the Gap Between Motor Starters and Variable Frequency Drives
- RF-STAR Focused on the Bluetooth Field and Has Rich Experience in Solution Design
- NISSHINBO Newly Lanuched NR1600 Series,500mA Low Dropout Voltage Regulator with Soft-Start Time Adjustment and Power-Good Function
- PEPS (Passive Entry And Startup) System Circuit Protection Solution
- Sunstar Engineering Americas Wins the Mazda Excellence Supplier Award
- RF-STAR Launched The CC2640R2L Module With A Lower Cost And High Performance
- World Earth Day 2024: Discover SUNSTAR Facility in Germany
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.