Evaluation boards with STM32MP157 MPUs

2021-12-08
The STM32MP157C-EV1 and STM32MP157A-EV1 Evaluation boards (STM32MP157x-EV1) are designed as complete demonstration and development platforms for STMicroelectronics Arm®-based dual -A7 32 bits and Cortex®-M4 32 bits MPUs in the STM32MP1 Series. They leverage the capabilities of STM32MP1 Series microprocessors for the user to develop applications, using STM32 MPU OpenSTLinux Distribution software for the main processor, and STM32CubeMP1 software for the co-processor. They include an ST-LINK embedded debug tool, LEDs, push-buttons, one joystick, 1-Gbps Ethernet, CAN FD,one USB OTG Micro-AB connector, four USB Host Type-A connectors, LCD display with touch panel, camera, stereo headset jack with analog microphone input, four digital microphones, one SPDIF Rx/Tx, Smartcard, microSD™ card, and eMMC, NOR and NAND Flash memories.
STM32MP157x-EV1, shown in Figure 1 and Figure 2, is used as the reference design for user application development, although it is not considered as final application.
To expand the functionality of the STM32MP157C-EV1 and STM32MP157A-EV1 Evaluation boards, two GPIO expansion connectors are also available for motor control and Raspberry Pi® shields.
An ST-LINK/V2-1 is integrated on the board, as embedded in-circuit debugger and programmer for the STM32 MPU and the USB Virtual COM port bridge.

ST

STM32MP157STM32MP157A-EV1STM32MP157C-EV1STM32MP157x-EV1STM32CubeMP1STM32MP1StarterSTM32STM32MP157AAA3STM32MP157CAA3STM32MP1STM32MP1 SeriesSTM32MP1XXY-EVZSTM32MP157xAA3

More

Part#

Evaluation boardsmicrocontroller

More

More

User's Guide

More

More

Please see the document for details

More

More

LFBGA448

English Chinese Chinese and English Japanese

22-Aug-2019

Rev 2

UM2535

14.6 MB

- The full preview is over. If you want to read the whole 59 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: