Discovery kits with increased-frequency 800 MHz STM32MP157 MPUs
●The STM32MP157D-DK1 and STM32MP157F-DK2 Discovery kits (STM32MP157x-DKx) are designed as complete demonstration and development platforms for STMicroelectronics Arm®-based dual Cortex®-A7 32 bits and Cortex®-M4 32bits MPUs in the STM32MP1 Series and their STPMIC1 companion chip. They leverage the capabilities increased-frequency 800 MHz of STM32MP1 Series microprocessors to allow users to develop applications using STM32 MPU Open STLinux Distribution software (such as STM32MP1Starter) for the main processor and STM32CubeMP1 software for the co-processor.
●They feature 16-bit DDR3L 4 Gbits at 533 MHz, MIPI DSISM 2 lanes at 1 Gbps, USB Type-C® DRP HS port, USB Type-A HostHS ports, audio codec with analog audio input / output, microSD™ card high-speed mode up to 50 MHz, Gigabit Ethernet,HDMI® up to 720p60 (1280 × 720), 40-pin extended GPIOs, ARDUINO®, Wi‑Fi® 802.11b/g/n, Bluetooth® Low Energy 4.1, and ST-LINK/V2-1 (UART console).
●The STM32MP157F-DK2, shown with display removed in Figure 1 and Figure 2, is used as a reference design for user application development. It cannot be considered as the hardware design of a final application.
●The hardware features of the Discovery kits are available for users to develop their applications: USB, Ethernet, LTDC, TFTLCD MIPI DSISM, microSD™ card, audio codec, user buttons, Wi‑Fi®, and Bluetooth® Low Energy. Extension headers allow easy connection of an ARDUINO® board for a specific application.
●An ST-LINK/V2-1 is integrated on the board, as embedded in-circuit debugger and programmer for the STM32 MPU and theUSB Virtual COM port bridge.
■Features
●Common features
▲ STM32MP157 Arm®-based dual Cortex®‑A7 800 MHz 32 bits + Cortex®‑M4 32 bits MPU in TFBGA361 package
▲ST PMIC STPMIC1
▲ 4-Gbit DDR3L, 16 bits, 533 MHz
▲1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab
▲ USB OTG HS
▲ Audio codec
▲ 4 user LEDs
▲ 2 user and reset push-buttons, 1 wake-up button
▲5 V / 3 A USB Type-C® power supply input (not provided)
▲Board connectors:
◆Ethernet RJ45
◆4 × USB Host Type-A
◆USB Type-C® DRP
◆MIPI DSISM
◆HDMI®
◆Stereo headset jack including analog microphone input
◆microSD™ card
◆GPIO expansion connector (Raspberry Pi® shield capability)
◆ARDUINO® Uno V3 expansion connectors
▲On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM portand debug port
▲STM32CubeMP1 and full mainline open-source Linux® STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples
▲ Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
● Board-specific features
▲4" TFT 480×800 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
▲Wi‑Fi® 802.11b/g/n
▲Bluetooth® Low Energy 4.1
|
STM32MP157 、 STM32MP157D-DK1 、 STM32MP157F-DK2 、 STM32MP157x-DKx 、 STM32MP1 Series 、 STM32MP1 、 STPMIC1 、 STM32CubeMP1 、 STM32MP1Starter |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
TFBGA361 |
|
|
English Chinese Chinese and English Japanese |
|
|
10-Nov-2020 |
|
|
Rev 1 |
|
|
UM2637 |
|
|
14.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
