Gasket Tape Series 1000 Datasheet
●Material: 100 % expanded PTFE (polytetrafluoroethylene), with multidirectional strength.
●Operating Range: The maximum applicable pressure and temperature depend mainly on the equipment and installation.
▲Typical use: -60 °C to 230 °C (-76 °F to 445 °F ); industrial full vacuum to 10 bar (145 psi)
▲Maximum use: -269 °C to 315 °C (-452 °F to 600 °F ); full vacuum to 16 bar (230 psi) for flanges up to DN 2000/ASME 80”.
▲Be aware that flange surface irregularities may cause high peak loads. Please contact Gore if further guidance is required.
▲For applications outside the typical use range, Gore recommends an application specific engineering design calculation and extra care during installation.
●Chemical Resistance: Chemical resistance to all media pH 0–14, except molten alkali metals and elemental fluorine.
●Shelf Life: ePTFE is not subject to aging and can be stored indefinitely. To ensure optimal adhesive function, we recommend use within two years of date of purchase when stored under normal conditions.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
MAR18 |
|
R4 |
|
SEAL-220-R4-DSH-EN-MAR18 |
|
190 KB |
- +1 Like
- Add to Favorites
Recommend
- The SLE Series Expands SL Power‘s Lean Line Ranging from 6 to 36 Watts
- Nippon Chemi-Con Developed HXE Series Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Guaranteeing 4000 Hours at 135℃
- OWON Has Demonstrated its XSA1000 Series, OWP-H, SPE Series, XDM Series in the 2023 Hong Kong Electronics Show
- Nippon Chemi-Con Updates KHE Series Snap-in Type Aluminum Electrolytic Capacitors with Approximately 20% Higher Capacitance
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- OWON SPE Series DC Power Supply with Maximum Output Voltage of 60V and The Maximum Output Current of 10A
- Coherent Introduces 1000 mW Red Laser Modules for Super-Resolution Microscopy
- Chroma Launches 62000E Series 1U DC Power Supply with 3-channel Output Based on High Power Density Design
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.