San Ace 40W 9WP type 40×40×20 mm Splash Proof Fan
■Material:Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
■Expected life:See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60˚C, rated voltage)
■Motor protection function:Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529.
■Dielectric strength:50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
■Insulation resistance:10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
■Sound pressure level (SPL):At 1 m away from the air inlet
■Storage temperature:-30 to +70˚C (Non-condensing)
■Mass:50 g
■Ingress protection:IP68
9WP type 、 9WP 、 9WP0412H6001 、 9WP0412F6001 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2018/06/28 |
|
|
|
|
|
116 KB |
- +1 Like
- Add to Favorites
Recommend
- SANYO DENKI Launches 40×40×20mm and 40×40×28mm Splash Proof Fans with the Highest Airflow of 0.38m³/min and Static Pressure of 210Pa Max
- SANYO DENKI Launches 92×92×25mm San Ace 92 9RA Type DC Fan with the Lowest Noise up to 23dB
- SANYO DENKI Launched 120×120×25mm San Ace 120 9RA Type DC Fan with the Lowest Noise up to 28dB
- Trouble With Electromagnetic Environments? SANYO DENKI’s Expert EMC Solutions Help
- SANYO DENKI Launches 120×120×38mm San Ace 120 9RA type DC Fan with the Lowest Noise of 37dB Min and a Wide Variety in 12/24/48 Voltage
- SANYO DENKI Releases San Ace 120AD ACDC Fan and Splash Proof ACDC Fan with Highest Airflow of 3.9m³/min and Static Pressure of 170Pa Max
- SANYO DENKI Launches 140×140×38mm DC Fan with the Lowest Noise in the Industry,Suitable for Cooling Commercial Air Conditioners and Medical Equipment
- SANYO DENKI Launches 80×80×38mm DC Fan with the Lowest Noise in the Industry
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.