IS2083 Bluetooth® Audio Application Design Guide

2021-10-22
Microchip’s Multi-Speaker Bluetooth Audio solution utilizes Microchip proprietary technology to connect a master speaker to one or multiple slave speakers through a modified Bluetooth protocol. Multi-Speaker functionality is implemented using Microchip’s IS2083BM device. One (master) speaker can either be connected to a Bluetooth-enabled device (smartphone, tablet, laptop, etc.) A master/speaker can be connected to a device (phone or tablet) over Bluetooth or AUX-in jack, and re-transmit either of the two audio sources to one or more speakers acting as a slave.
Multi-Speaker solutions can be achieved using Class 1 BM83 modules, which allow for extended range. This is a widely used technology for applications such as PA conference systems or wireless audio throughout indoor or outdoor.
Multi-Speaker can be provisioned to Concert mode (two or more speakers) or in Stereo mode (two speakers). For more details, refer to “Demo Setup” and “Firmware Capabilities/Features”.
Figure 1 illustrates a typical Concert mode application where the master speaker is connected to a Bluetooth-enabled device.
Figure 2 illustrates a typical Concert mode application where the master is connected to a Bluetooth-enabled device through AUX-In.
Figure 3 illustrates a typical Stereo mode application where the master is connected to a Bluetooth-enabled device.
Figure 4 illustrates a typical Stereo mode application where the master is connected to a Bluetooth-enabled device through AUX-In.

MICROCHIP

IS2083

More

Part#

Bluetooth

More

More

Application note & Design Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

07/2019

Revision A

AN3118,DS00003118A

7.3 MB

- The full preview is over. If you want to read the whole 72 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: