JUMO dTRANS T05 Programmable two-wire transmitter

2021-10-21
●Brief description
■The transmitters record sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers. When using a resistor/potentiometer or RTD temperature probe, the sensor connection on the input side can be connected with a two-wire, three-wire, or four-wire circuit. Voltage signals in the range from -100 to +1100 mV can also be recorded. Depending on the selected measurement input, the linear and temperature-linear linearization variants and the possibility of easily configurable customer-speoihc linearization are available.
■Type 707050 delivers 4 to 20 mA as an output signal. Type 707051 delivers 4 to 20 mA or 0 to 10 Vas an output signal. The measurement input and the output signal are galvanically isolated from one another. The output signal can be reversed for both types.
■The transmitter configuratien with respect to probe type, connection technology of the probe,measuring range (user configurable), and linearization is carried out by a setup program on the PC. The connection to the PC is established via a USB interface which does not require additional auxiliary voltage. Via the USB interface, the min./max. process value and the min./max. operating temperature recorded by the transmitter can be read and the sensor wiring can be checked online.
■The operating status of the transmitter is indicated by a two-color control LED (red/green). The control LED is lit green during malfunction-free operation. A fault such as a probe break will be shown by the corresponding LED signaling.
●Special features
■Measuring input for RTD temperature probe, thermocouple, resistor/potentiometer, resistance transmitter, and voltage
■ Input and output are electrically isolated
■ Control LED (red/green)
■ Configuration directly via USB cable without additional auxiliary voltage
■ Customer-specific linearization
■ Detection ofthe min./max. process value(drag pointer function including point in time)
■ Option to specify the temperature in °F for temperature sensors
■ Type 707051 available with screw terminals or spring-cage terminals

Jumo

dTRANS T05dTRANS T05 BdTRANS T05 T707050707051705051705050707050/8-06/000005822190058222000582221005749590050625200616250006393600035246300528648707051/8-06/000707051/8-07/000

More

Part#

Programmable two-wire transmitterRTD temperature probesthermocouplesresistance transmittersresistorspotentiometers.

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021-06-22

V2.00

00576949

747 KB

- The full preview is over. If you want to read the whole 13 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: