MPC574xP SENT/SPC Driver
■This application note describes the SENT/SPC driver for the MPC574xP 32-bit microcontrollers. It also provides information on the Single Edge Nibble Transmission protocol (SENT, SAE J2716), along with its Short PWM Code (SPC) enhancement. Additionally, the driver implementation, API, and functional description are also discussed in this application note.
■The information about the SENT protocol has been derived from the SAE J2716 Surface Vehicle Information Report, JAN2010.
■The information about the SPC enhancement has been derived from the TLE4998C Data Sheet, Rev 1.0, December 2008.
■The MPC574xP SENT/SPC driver itself and the example application are part of the AN4856SW package.
●Overview:
■The Single Edge Nibble Transmission protocol is targeted for use in those applications where high-resolution data is transmitted from a sensor to the ECU. It can be considered as an alternative to conventional sensors providing analog output voltage, and for PWM output sensors. It can also be considered as a low-cost alternative to the LIN or CAN communication standards.
■Applications for electric power steering, throttle position sensing, pedal position sensing, airflow mass sensing, liquid level sensing, etc., can be used as examples of target applications for SENT-compatible sensor devices.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
03/2014 |
|
Rev. 0 |
|
AN4856 |
|
600 KB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.