MPC574xP Hardware Design Guide
●The MPC574xP is a Power Architecture®based microcontroller targeting automotive chassis and safety applications. This microcontroller features a number of analog, communication, and safety modules, as well as two e200z4 core complexes running in delayed lock step at up to 200 MHz.
●The MPC574xP requires both 3.3V and 1.25V supplies. These supplies can either both be provided externally, or the 3.3V supply can be used to generate the 1.25V supply via an internal regulator and external ballast transistor. In the simplest configuration, a single 3.3V supply can power the entire device.
●The intention of this application note is to provide:
■Power supply requirements and the correct external circuitry required for each supply
■Guidelines for handling injection current, including requirements for power supply ramp rates
■Proper configuration of the external PLL circuitry
■Example external interfaces for the communication and analog modules
●Please note that information from the MPC574xP Reference Manual, Datasheet, and/or Errata report may be repeated in this application note for the convenience of the reader. The reference manual, datasheet, and errata report are the official specification for the MPC574xP and should be reviewed for the most up-to-date information available for this device.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
LQFP;MAPBGA |
|
English Chinese Chinese and English Japanese |
|
06/2020 |
|
Rev. 3 |
|
AN5267 |
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.