Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
2019-08-15
The Si7201/2/3/4/5/6 family of Hall effect magnetic sensors and latches from Silicon
Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-
bit analog-to-digital converter, and flexible comparator circuit. Leveraging Silicon Labs'
proven CMOS design techniques, the Si720x family incorporates digital signal processing
to provide precise compensation for temperature and offset drift.
Compared with existing Hall effect sensors, the Si720x family offers industry-leading
sensitivity, which enables use with larger air gaps and smaller magnets. For batterypowered
applications, the Si720x family offers very low power consumption to improve
operating life. For automotive applications, the Si720x family is AEC-Q100 qualified.
The Si720x devices are offered in 3-pin SOT23 and TO-92 packages, with power,
ground, and a single output pin that goes high or low as the magnetic field increases.
With the three-pin package, tamper indication is by the pin going back to its zero field
level at high magnetic field.
In the 5-pin SOT23 and 8-pin DFN packages, pins are available for both sleep mode activation
and separate tamper indication.
Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-
bit analog-to-digital converter, and flexible comparator circuit. Leveraging Silicon Labs'
proven CMOS design techniques, the Si720x family incorporates digital signal processing
to provide precise compensation for temperature and offset drift.
Compared with existing Hall effect sensors, the Si720x family offers industry-leading
sensitivity, which enables use with larger air gaps and smaller magnets. For batterypowered
applications, the Si720x family offers very low power consumption to improve
operating life. For automotive applications, the Si720x family is AEC-Q100 qualified.
The Si720x devices are offered in 3-pin SOT23 and TO-92 packages, with power,
ground, and a single output pin that goes high or low as the magnetic field increases.
With the three-pin package, tamper indication is by the pin going back to its zero field
level at high magnetic field.
In the 5-pin SOT23 and 8-pin DFN packages, pins are available for both sleep mode activation
and separate tamper indication.
- +1 Like
- Add to Favorites
Recommend
More>
- Silicon Labs Simplifies IoT Development with Simplicity Studio 5
- Silicon Labs Strengthens Isolated Gate Driver Portfolio
- Software Speeds Development of IEEE 1588 System Integration | Silicon Labs
- Silicon Labs Expands Isolated Gate Driver Product Family Ideal for Hybrid and Electric Vehicles (EV)
- News | Silicon Labs and Amazon Collaborate on Sidewalk, a New Shared Network for IoT Consumer Devices
- Silicon Labs and Skyworks reach agreement to sell infrastructure and automotive business
- Silicon Labs Z-Wave Wireless Selected for Johnson Controls Next Generation Qolsys Smart Home Panel
- Navigate the New IoT Labeling Program with Silicon Labs’ Best-In-Class Security
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
