Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet

2020-08-21

The Si7201/2/3/4/5/6 family of Hall effect magnetic sensors switches and latches from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-bit analog-to-digital converter, and a flexible comparator circuit. Leveraging Silicon Labs' proven CMOS design techniques, the Si720x family incorporates digital signal processing to provide precise compensation for temperature and offset drift.
Compared with existing Hall effect sensors, the Si720x family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets. For battery-powered applications, the Si720x family offers very low power consumption to improve operating life.
The Si720x devices are offered in 3-pin SOT23, 5-pin SOT23, and TO-92 packages,with power, ground, a single output pin that goes high or low as the magnetic field in-creases, and with the 5-pin parts a disable(sleep) pin, and a tamper output pin. With the three-pin package, tamper indication is by the pin going back to its zero field level at high magnetic field.
• High-Sensitivity Hall Effect Sensor
• Maximum BOP operating point/minimum field strength of <1.1 mT
• Omnipolar or unipolar operation
• Integrated digital signal processing for temperature and offset drift compensation
• Low 400 nA Typical Current Consumption at 5 samples per second
• Selectable Sensitivity, Hysteresis, Output Polarity and Sample Rate
• Sensitivity Drift < ±3% over Temperature
• Wide Power Supply Voltage
• 1.71 to 5.5 V
• 3.3 to 26.5 V
• Selectable Output Options
• Open-drain output
• Digital high/low output
• Industry-Standard Packaging
• Surface mount SOT-23 (3 or 5 pin)
• Through hole TO-92 (3-pin)
• 1.4 x 1.6 mm 8-pin DFN package (coming so)

Silicon Labs

Si720xSi7201Si7202Si7203Si7205Si7204Si7206Si72xxSi7203-B-01-IVSi7201-B-1xSi7201-B-2xSi7201-B-3xSi7201-B-4xSi7201-B-8xSi7201-B-9xSi7202-B-01-IVSi7202-B-01-IRSi7201-B-08-IVSi7201-B-08-IRSi7204- B-00-FVSi7202-B-00-FVSi7202-B-01-IBSi7202-B-02-IVSi7202-B-04-IBSi7206-B-00-IVSi7203-B-00-FVSi7205-B-00-IVSI7201-B-40-IVSI7201-B-41-IVSi7201-B-80-FVSi7201-B-81-FVSi7201-B-82-FVSi7201-B-83-IVSi7201-B-84-IVSi7201-B-85-IVSi7201-B-86-IVSi7201-B-87-IVSi7201-B-09-IBSI7201-B-10-IVSi7201-B-11-IBSI7201-B-12-IVSI7201-B-20-IVSI7201-B-21-IVSI7201-B-22-IVSI7201-B-30-IVSI7201-B-31-IVSI7201-B-32-IVSi7201-B-00-FVSi7201-B-01-FVSi7201-B-02-FVSi7201-B-03-IVSi7201-B-04-IVSi7201-B-05-IVSi7201-B-06-IVSi7201-B-07-IVSi7201BxxFVRSi720xxx

More

Part#

Switch/Latch Hall Effect Magnetic Position Sensor

More

Replacement of reed switches in consumer, and security applications ]Position sensing of HVAC knob, doorlocks, windows, and other mechanical devices ]BLDC motor control ]Camera image stabilization, zoom,and autofocus ]Fluid level sensing ]Control knobs and selector switches ]General-purpose mechanical position sensing ]

More

Datasheet

More

More

Please see the document for details

More

More

SOT23;TO92S;SOT23-5;TO92;SOT23-3

English Chinese Chinese and English Japanese

May, 2020

Rev. 1.4

1.1 MB

- The full preview is over. If you want to read the whole 32 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: